Specification sheet Wheel Loader Ref wacker-neuson-280-wheel-loader
Wacker Neuson 280
The Wacker Neuson 280 is a wheel loader with an operating weight of 7,054.8 lb (3,200 kg), a 49 hp engine, and a 1.44 yd³ (1.11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,054.8lb
3,200kg
Engine power
49hp
36.54kW
Gross Power Bucket capacity
1.44yd³
1.11m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson 280 sits at the compact end of its class:
- Operating weight 7,050 lb lighter than 92% (n=374)
- Engine power 49 hp less powerful than 82% (n=367)
- Bucket capacity 1.4 yd³ larger-bucket than 52% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV88 | |
| Gross Power | 49hp | 36.6kw |
02 Operational Specification
| Operating Weight | 7054.8lb | 3200kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Hydraulic System Fluid Capacity | 17.2gal | 65L |
| Static Tipping Weight | 5158.9lb | 2340kg |
| Turning Radius | 11.2ft in | 3400mm |
| Rear Axle Oscillation | 28degrees | |
| Tire Size | 12.5 - 18 |
03 Transmission Specification
| Transmission Type | Continuously variable hydrostatic axial-piston gearbox | |
|---|---|---|
| Max Speed - Forward | 12mph | 19.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3481psi | 24000.7kPa |
|---|---|---|
| Pump Flow Capacity | 13.8gal/min | 52L/min |
| Raise Time | 4.8sec | |
| Dump Time | 0.6sec | |
| Lower Time | 3.7sec | |
| Pump Type | Gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.55ft in | 2300mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.44yd3 | 1.11m3 |
| Breakout Force | 6137lb | 27.3kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 15.13ft in | 4610mm |
|---|---|---|
| Width Over Tires | 4.93ft in | 1500mm |
| Height To Top Of Cab | 7.68ft in | 2340mm |
| Wheelbase | 5.75ft in | 1750mm |
| Hinge Pin - Max Height | 9.91ft in | 3020mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.