Wacker Neuson 1404
The Wacker Neuson 1404 is a mini excavator with a 24.3 hp engine, and a dig depth of 7.35 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Wacker Neuson 1404 sits in the middle of its class:
- Engine power 24 hp more powerful than 53% (n=448)
- Dig depth 7.3 ft shallower-digging than 80% (n=426)
Not positioned on operating weight — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 11.96ft in | 3,645mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 11.13ft in | 3,392mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 7.47ft in | 2,277mm‖ — metric converted from the published imperial value |
| Max Loading Height | 7.78ft in | 2,371mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 11.98ft in | 3,652mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.39ft in | 1,643mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.35ft in | 2,240mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 2.96ft in | 902mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.6ft in | 183mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.47ft in | 2,277mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.53ft in | 1,076mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 9.06in | 230mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 1.5mph | 2.4km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 3TNV76 | |
| Gross Power | 24.3hp | 18.1kw‖ — metric converted from the published imperial value |
05 Operational Specification
| Fuel Capacity | 6.4gal | 24l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Fluid Capacity | 13.3gal | 50.3l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 2900.8psi | 20,000kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 9.2gal/min | 35l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.