Specification sheet Compact Track Loader Ref volvo-mct125c-multi-terrain-loader

Volvo MCT125C

The Volvo MCT125C is a compact track loader with an operating weight of 10,205 lb (4,628.92 kg), a 84 hp engine, a rated operating capacity of 2,600 lb (1,179.35 kg), and a 0.9 yd³ (0.7 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
10,205lb
4,628.92kg
Engine power
84hp
62.64kW
Net Power
Rated operating capacity
2,600lb
1,179.35kg
Bucket capacity
0.9yd³
0.7m³

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Volvo MCT125C sits above the median for its class:

  • Operating weight 10,210 lb heavier than 73% (n=182)
  • Engine power 84 hp more powerful than 78% (n=167)
  • Rated operating capacity 2,600 lb lower-rated than 51% (n=156)

Scale drawingdrawn to scale · mm

2080C248D3690A2740B
Side elevation
2080C1980E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2257
Engine Model TC63
Gross Power 84hp 62.7kw
Net Power 84hp 62.7kw
Power Measured @ 2200rpm
Peak Torque 267lb ft 362.1Nm
Torque Measured @ 1800rpm
Displacement 268cu in 4.4L
Aspiration Turbocharged

02 Operational Specification

Operating Weight 10205lb 4629kg
Cooling System Fluid Capacity 4.1gal 15.5L
Engine Oil Capacity 4gal 15L
Fuel Capacity 27.3gal 103L
Hydraulic System Fluid Capacity 15.9gal 60L
Operating Voltage 12V
Alternator Supplied Amperage 95amps
Max Speed - Low Range 5.8mph 9.2km/h
Max Speed - High Range 7.9mph 12.6km/h

03 Loader Specification

Operating Load 2600lb 1179.4kg
Bucket Capacity 0.9yd3 0.7m3
Bucket Width 78in 1981.2mm

04 Hydraulic Specification

Pump Flow 23gal/min 87L/min
Relief Valve Pressure 3335psi 22994kPa

05 Dimensions Dimensions

Width Over Tracks 6.5ft in 1980mm
Height To Top Of Cab 6.83ft in 2080mm
Ground Clearance 9.77in 248mm
Clearance At Max Lift And Dump 7.94ft in 2420mm
Reach At Max Lift And Dump 2.96ft in 900mm
Length With Out Bucket 8.99ft in 2740mm
Turning Radius From Center - Inc Bucket 69.3in 1760mm
Turning Radius From Center - Machine Rear 69.3in 1760mm
Length With Bucket 12.11ft in 3690mm

06 Undercarriage Dimensions

Width Of Track 17.72in 450mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.