Specification sheet Skid Steer Loader Ref volvo-mc80-skid-steer-loader

Volvo MC80

The Volvo MC80 is a skid steer loader with an operating weight of 6,837 lb (3,101.22 kg), a 86 hp engine, a rated operating capacity of 1,750 lb (793.79 kg), and a tipping load of 3,500 lb (1,587.58 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,837lb
3,101.22kg
Engine power
86hp
64.2kW
Gross Power
Rated operating capacity
1,750lb
793.79kg
Tipping load
3,500lb † — value reconstructed from related published figures
1,587.58kg
Bucket capacity
0.7yd³
0.5m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Volvo MC80 sits in the middle of its class:

  • Operating weight 6,840 lb heavier than 51% (n=334)
  • Engine power 86 hp more powerful than 93% (n=335)
  • Rated operating capacity 1,750 lb lower-rated than 61% (n=288)

◇Scale drawingdrawn to scale · mm

2058C188D3479A2746B
Side elevation
2058C1826E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2351
Engine Model 1004.42
Gross Power 86hp 64.2kw
Power Measured @ 2400rpm
Displacement 258cu in 4.3L

02 Operational Specification

Operational Weight 6837lb 3101.3kg
Fuel Capacity 22.5gal 85L
Cooling System Fluid Capacity 4.1gal 15.5L
Engine Oil Fluid Capacity 2.8gal 10.4L
Max Speed 6.3mph 10.1km/h
Hydraulic System Fluid Capacity 17gal 64L
Chain Box Fluid Capacity - Each Side 2.3gal 8.7L
Operating Speed 6.3mph 10.1km/h
Tire Size 12.00x16.5
Operating Voltage 12V
Alternator Supplied Amperage 40amps

03 Loader Specification

Operating Load Rating 1750lb 793.8kg
Bucket Capacity 0.7yd3 0.5m3

04 Hydraulic Specification

Pump Flow Capacity 20.3gal/min 76.9L/min
Relief Valve Pressure 2700psi 18615.9kPa

05 Dimensions Dimensions

Length With Bucket 11.42ft in 3479mm
Width Over Tires 6ft in 1826mm
Ground Clearance 7.41in 188mm
Height To Top Of Cab 6.76ft in 2058mm
Wheelbase 3.35ft in 1019mm
Length W/O Bucket 9.01ft in 2746mm
Clearance At Max Lift And Dump 7.86ft in 2394mm
Reach At Max Lift And Dump 24.61in 625mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.