Specification sheet Skid Steer Loader Ref volvo-mc70-skid-steer-loader

Volvo MC70

The Volvo MC70 is a skid steer loader with an operating weight of 5,902 lb (2,677.11 kg), a 60 hp engine, a rated operating capacity of 1,500 lb (680.39 kg), and a tipping load of 3,000 lb (1,360.78 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
5,902lb
2,677.11kg
Engine power
60hp
44.8kW
Gross Power
Rated operating capacity
1,500lb
680.39kg
Tipping load
3,000lb † — value reconstructed from related published figures
1,360.78kg
Bucket capacity
0.6yd³
0.5m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Volvo MC70 sits below the median for its class:

  • Operating weight 5,900 lb lighter than 70% (n=334)
  • Engine power 60 hp less powerful than 56% (n=335)
  • Rated operating capacity 1,500 lb lower-rated than 77% (n=288)

◇Scale drawingdrawn to scale · mm

1979C209D3394A2594B
Side elevation
1979C1660E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2334
Engine Model V2003-TB
Gross Power 60hp 44.8kw
Power Measured @ 2800rpm
Aspiration Turbocharged
Displacement 122cu in 2L

02 Operational Specification

Operational Weight 5902lb 2677.2kg
Fuel Capacity 17.5gal 66L
Cooling System Fluid Capacity 4gal 15.1L
Engine Oil Fluid Capacity 2.3gal 8.5L
Max Speed 6.9mph 11.1km/h
Hydraulic System Fluid Capacity 9.6gal 36L
Chain Box Fluid Capacity - Each Side 1.6gal 5.7L
Operating Speed 6.9mph 11.1km/h
Tire Size 10.00x16.5
Operating Voltage 12V
Alternator Supplied Amperage 45amps

03 Loader Specification

Operating Load Rating 1500lb 680.4kg
Bucket Capacity 0.6yd3 0.5m3

04 Hydraulic Specification

Pump Flow Capacity 30.6gal/min 115.9L/min
Relief Valve Pressure 2500psi 17236.9kPa

05 Dimensions Dimensions

Length With Bucket 11.14ft in 3394mm
Width Over Tires 5.45ft in 1660mm
Ground Clearance 8.23in 209mm
Height To Top Of Cab 6.5ft in 1979mm
Wheelbase 3.37ft in 1026mm
Length W/O Bucket 8.52ft in 2594mm
Clearance At Max Lift And Dump 7.1ft in 2162mm
Reach At Max Lift And Dump 26.5in 673mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.