Specification sheet Skid Steer Loader Ref volvo-mc60b-skid-steer-loader

Volvo MC60B

The Volvo MC60B is a skid steer loader with an operating weight of 5,624 lb (2,551 kg), a 45.3 hp engine, a rated operating capacity of 1,400 lb (635 kg), and a tipping load of 2,878 lb (1,305.44 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
5,624lb
2,551kg
Engine power
45.3hp
33.71kW
Net Power
Rated operating capacity
1,400lb
635kg
Tipping load
2,878lb † — value reconstructed from related published figures
1,305.44kg
Bucket capacity
0.5yd³
0.4m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Volvo MC60B sits below the median for its class:

  • Operating weight 5,620 lb lighter than 75% (n=334)
  • Engine power 45 hp less powerful than 82% (n=335)
  • Rated operating capacity 1,400 lb lower-rated than 81% (n=288)

◇Scale drawingdrawn to scale · mm

1990C208D3306A2688B
Side elevation
1990C1516E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2244
Engine Model D2.2A
Gross Power 49.5hp 36.9kw
Net Power 45.3hp 33.7kw
Aspiration Natural
Displacement 134cu in 2.2L

02 Operational Specification

Operational Weight 5624lb 2551kg
Cooling System Fluid Capacity 2.4gal 9L
Engine Oil Fluid Capacity 2.4gal 9L
Hydraulic System Fluid Capacity 15gal 56.8L
Max Speed 6.9mph 11km/h
Operating Voltage 12V
Alternator Supplied Amperage 55amps

03 Loader Specification

Operating Load Rating 1400lb 635kg
Bucket Capacity 0.5yd3 0.4m3

04 Hydraulic Specification

Pump Flow Capacity 17.1gal/min 64.8L/min

05 Dimensions Dimensions

Length With Bucket 10.85ft in 3306mm
Width Over Tires 4.98ft in 1516mm
Ground Clearance 8.19in 208mm
Height To Top Of Cab 6.53ft in 1990mm
Wheelbase 3.37ft in 1026mm
Length W/O Bucket 8.82ft in 2688mm
Clearance At Max Lift And Dump 7.19ft in 2190mm
Reach At Max Lift And Dump 25.44in 646mm
Turning Radius From Center - Machine Rear 55in 1398mm
Turning Radius From Center - Inc Bucket 85.5in 2172mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.