Specification sheet Skid Steer Loader Ref volvo-mc60-skid-steer-loader

Volvo MC60

The Volvo MC60 is a skid steer loader with an operating weight of 5,478 lb (2,484.78 kg), a 49.5 hp engine, a rated operating capacity of 1,350 lb (612.35 kg), and a tipping load of 2,700 lb (1,224.7 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
5,478lb
2,484.78kg
Engine power
49.5hp
37kW
Gross Power
Rated operating capacity
1,350lb
612.35kg
Tipping load
2,700lb † — value reconstructed from related published figures
1,224.7kg
Bucket capacity
0.6yd³
0.5m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Volvo MC60 sits below the median for its class:

  • Operating weight 5,480 lb lighter than 80% (n=334)
  • Engine power 50 hp less powerful than 73% (n=335)
  • Rated operating capacity 1,350 lb lower-rated than 83% (n=288)

◇Scale drawingdrawn to scale · mm

1979C209D3322A2590B
Side elevation
1979C1506E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2334
Engine Model V2203-B
Gross Power 49.5hp 37kw
Power Measured @ 2800rpm
Displacement 134cu in 2.2L

02 Operational Specification

Operational Weight 5478lb 2484.8kg
Fuel Capacity 17.5gal 66L
Cooling System Fluid Capacity 4gal 15.1L
Engine Oil Fluid Capacity 2.3gal 8.5L
Max Speed 6.5mph 10.3km/h
Hydraulic System Fluid Capacity 9.6gal 36L
Chain Box Fluid Capacity - Each Side 1.6gal 5.7L
Operating Speed 6.5mph 10.3km/h
Tire Size 10.00x16.5
Operating Voltage 12V
Alternator Supplied Amperage 45amps

03 Loader Specification

Operating Load Rating 1350lb 612.4kg
Bucket Capacity 0.6yd3 0.5m3

04 Hydraulic Specification

Pump Flow Capacity 16.6gal/min 62.9L/min
Relief Valve Pressure 2500psi 17236.9kPa

05 Dimensions Dimensions

Length With Bucket 10.9ft in 3322mm
Width Over Tires 4.95ft in 1506mm
Ground Clearance 8.23in 209mm
Height To Top Of Cab 6.5ft in 1979mm
Wheelbase 3.07ft in 933mm
Length W/O Bucket 8.5ft in 2590mm
Clearance At Max Lift And Dump 7.16ft in 2180mm
Reach At Max Lift And Dump 25in 635mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.