Specification sheet Skid Steer Loader Ref volvo-mc135c-skid-steer-loader

Volvo MC135C

The Volvo MC135C is a skid steer loader with an operating weight of 8,430 lb (3,823.79 kg), a 92 hp engine, a rated operating capacity of 3,000 lb (1,360.78 kg), and a tipping load of 6,024 lb (2,732.44 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,430lb
3,823.79kg
Engine power
92hp
68.61kW
Net Power
Rated operating capacity
3,000lb
1,360.78kg
Tipping load
6,024lb † — value reconstructed from related published figures
2,732.44kg
Bucket capacity
0.9yd³
0.7m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Volvo MC135C sits at the heavy end of its class:

  • Operating weight 8,430 lb heavier than 88% (n=334)
  • Engine power 92 hp more powerful than 97% (n=335)
  • Rated operating capacity 3,000 lb higher-rated than 91% (n=288)

◇Scale drawingdrawn to scale · mm

2090C238D3780A2740B
Side elevation
2090C1830E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2257
Engine Model TC63
Gross Power 92hp 68.7kw
Net Power 92hp 68.7kw
Power Measured @ 2200rpm
Max Torque 301lb ft 408.2Nm
Torque Measured @ 1800rpm
Aspiration Turbocharged
Displacement 268cu in 4.4L

02 Operational Specification

Operational Weight 8430lb 3823.8kg
Fuel Capacity 27.3gal 103L
Cooling System Fluid Capacity 4.1gal 15.5L
Engine Oil Fluid Capacity 4gal 15L
Max Speed 6.8mph 10.9km/h
Hydraulic System Fluid Capacity 15.9gal 60L
Operating Voltage 12V
Alternator Supplied Amperage 95amps

03 Loader Specification

Operating Load Rating 3000lb 1360.8kg
Bucket Capacity 0.9yd3 0.7m3
Bucket Width 78in 1981.2mm

04 Hydraulic Specification

Pump Flow Capacity 23gal/min 87L/min
Relief Valve Pressure 3335psi 22994kPa

05 Dimensions Dimensions

Length With Bucket 12.41ft in 3780mm
Width Over Tires 6.01ft in 1830mm
Ground Clearance 9.38in 238mm
Height To Top Of Cab 6.86ft in 2090mm
Wheelbase 4.01ft in 1220mm
Length W/O Bucket 8.99ft in 2740mm
Clearance At Max Lift And Dump 8.08ft in 2460mm
Reach At Max Lift And Dump 35.44in 900mm
Turning Radius From Center - Machine Rear 69.3in 1760mm
Turning Radius From Center - Inc Bucket 69.3in 1760mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.