Specification sheet Skid Steer Loader Ref volvo-mc110d-skid-steer-loader
Volvo MC110D
The Volvo MC110D is a skid steer loader with a 72.5 hp engine, and a tipping load of 5,447.7 lb (2,471 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
72.5hp
54.07kW
Net Power Tipping load
5,447.7lb
2,471kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Volvo MC110D sits above the median for its class:
- Engine power 73 hp more powerful than 64% (n=335)
Not positioned on operating weight, rated operating capacity — withheld or unpublished for this machine.
01 Speeds Specification
| Single Speed | 6.8mph | 11km/h |
|---|---|---|
| Two Speed | 12.4mph | 20km/h |
02 Engine Specification
| Starter | 5.7hp | 4.2kw |
|---|---|---|
| Gross Horsepower – Sae J1995 | 73.8hp | 55.1kw |
| Battery | 12/109 | |
| Number Of Cylinders | 4 | |
| Engine Model | TCAE-55 | |
| Net Power | 72.5hp | 54.1kw |
| Max Torque | 295.1lb ft | 400Nm |
| Aspiration | Turbo | |
| Fuel Type | Diesel | |
| Displacement | 268.5cu in | 4.4L |
| Alternator | 342000amps |
03 Capacities Specification
| Hydraulic Oil Reservoir | 6.9gal | 26L |
|---|---|---|
| Engine Oil W/ Filter Change | 4gal | 15L |
| Fuel Tank | 27.3gal | 103.3L |
| Cooling System | 5.9gal | 22L |
| Tipping Load | 5447.7lb | 2471kg |
| Hydraulic System | 14.6gal | 55L |
04 Performance Specification
| Rated Operating Capacity (Iso 14397) | 2526.5lb | 1146kg |
|---|---|---|
| Lift Arm Path | Radial | |
| Curl | 1.8sec | |
| Dump | 2.1sec | |
| Lower (Power Down) | 2.5sec | |
| Raise (Lifting) | 3.7sec |
05 Loader Specification
| Standard Hydraulic Pump Output | 23.8gal/min | 90L/min |
|---|---|---|
| High Flow Pump Output | 33.1gal/min | 125L/min |
| System Pressure | 3336psi | 23000.9kPa |
06 Weights Specification
| Weight | 8214.5lb | 3726kg |
|---|
07 Loader Specification
| Bucket Width | 74.9in | 1900mm |
|---|
08 Bucket Specification
| Multi Purpose Bucket Width | 6.1ft in | 1829mm |
|---|---|---|
| General Purpose Bucket Width | 6.1ft in | 1829mm |
| Landscape Bucket Width | 6.1ft in | 1829mm |
| Breakout Force, Lift | 5884.2lb | 2669kg |
| Breakout Force, Curl | 6543.4lb | 2968kg |
| General Purpose Bucket Length | 2.7ft in | 800mm |
| Landscape Bucket Length | 3.2ft in | 953mm |
| Multi Purpose Bucket Length | 3.2ft in | 953mm |
| General Purpose Bucket Height | 1.8ft in | 521mm |
| Landscape Bucket Height | 1.8ft in | 521mm |
| Multi Purpose Bucket Height | 2.3ft in | 701mm |
| Landscape Bucket Weight | 0.4in2 | 232mm2 |
| General Purpose Bucket Weight | 474lb | 215kg |
| Multi Purpose Bucket Weight | 776.1lb | 352kg |
| Multi Purpose Bucket Heaped Cap | 0.8yd3 | 0.6m3 |
| Landscape Bucket Heaped Cap | 0.8yd3 | 0.6m3 |
| General Purpose Bucket Heaped Cap | 0.6yd3 | 0.5m3 |
09 Dimensions Dimensions
| Ground Clearance | 9.85in | 250mm |
|---|---|---|
| Wheelbase | 4.11ft in | 1250mm |
| Dump Height | 7.55ft in | 2300mm |
| Height To Hinge Pin | 125.99in | 3200mm |
| Overall Height | 6.89ft in | 2100mm |
| Angle Of Departure | 29degrees | |
| Overall Length (W/Bucket) | 12.47ft in | 3800mm |
| Turning Radius | 5.78ft in | 1760mm |
| Turning Radius Front L/Bucket | 4.93ft in | 1500mm |
| Turning Radius Front W/Bucket | 7.55ft in | 2300mm |
| Overall Length (L/Bucket) | 9.85ft in | 3000mm |
| Dump Angle | 42degrees |
?Questions & answersfrom this machine's data
- What engine does a Volvo MC110D skid steer have?
- A Volvo MC110D skid steer is powered by a TCAE-55 engine producing 72.5 hp (54.1 kW).
- What is the ground clearance of a Volvo MC110D skid steer?
- A Volvo MC110D skid steer has a ground clearance of 9.9 in (250 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.