Specification sheet Skid Steer Loader Ref volvo-mc110-skid-steer-loader

Volvo MC110

The Volvo MC110 is a skid steer loader with an operating weight of 7,654 lb (3,471.8 kg), a 86 hp engine, a rated operating capacity of 2,300 lb (1,043.27 kg), and a tipping load of 4,600 lb (2,086.53 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,654lb
3,471.8kg
Engine power
86hp
64.2kW
Gross Power
Rated operating capacity
2,300lb
1,043.27kg
Tipping load
4,600lb † — value reconstructed from related published figures
2,086.53kg
Bucket capacity
0.7yd³
0.5m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Volvo MC110 sits above the median for its class:

  • Operating weight 7,650 lb heavier than 72% (n=334)
  • Engine power 86 hp more powerful than 93% (n=335)
  • Rated operating capacity 2,300 lb higher-rated than 70% (n=288)

◇Scale drawingdrawn to scale · mm

2058C188D3550A2821B
Side elevation
2058C1826E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2351
Engine Model 1004.42
Gross Power 86hp 64.2kw
Power Measured @ 2400rpm
Displacement 258cu in 4.3L

02 Operational Specification

Operational Weight 7654lb 3471.8kg
Fuel Capacity 22.5gal 85L
Cooling System Fluid Capacity 4.1gal 15.5L
Engine Oil Fluid Capacity 2.8gal 10.4L
Max Speed 6mph 9.6km/h
Hydraulic System Fluid Capacity 17gal 64L
Chain Box Fluid Capacity - Each Side 2.3gal 8.7L
Operating Speed 6mph 9.6km/h
Tire Size 12.00x16.5
Operating Voltage 12V
Alternator Supplied Amperage 55amps

03 Loader Specification

Operating Load Rating 2300lb 1043.3kg
Bucket Capacity 0.7yd3 0.5m3

04 Hydraulic Specification

Pump Flow Capacity 20.3gal/min 76.9L/min
Relief Valve Pressure 2700psi 18615.9kPa

05 Dimensions Dimensions

Length With Bucket 11.65ft in 3550mm
Width Over Tires 6ft in 1826mm
Ground Clearance 7.41in 188mm
Height To Top Of Cab 6.76ft in 2058mm
Wheelbase 3.65ft in 1112mm
Length W/O Bucket 9.26ft in 2821mm
Clearance At Max Lift And Dump 7.86ft in 2394mm
Reach At Max Lift And Dump 24.61in 625mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.