Specification sheet Skid Steer Loader Ref volvo-mc105c-skid-steer-loader
Volvo MC105C
The Volvo MC105C is a skid steer loader with a 54.1 hp engine, and a tipping load of 4,221.9 lb (1,915 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
54.1hp
40.35kW
Net Power Tipping load
4,221.9lb
1,915kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Volvo MC105C sits below the median for its class:
- Engine power 54 hp less powerful than 67% (n=335)
Not positioned on operating weight, rated operating capacity — withheld or unpublished for this machine.
01 Speeds Specification
| Single Speed | 12mph | 19.4km/h |
|---|
02 Engine Specification
| Starter | 2.8hp | 2.1kw |
|---|---|---|
| Gross Horsepower – Sae J1995 | 55hp | 41.1kw |
| Battery | 12 - 109 (V - Ah) | |
| Number Of Cylinders | 4 | |
| Engine Model | KDI 2504 TCR | |
| Net Power | 54.1hp | 40.4kw |
| Max Torque | 221.3lb ft | 300Nm |
| Aspiration | Turbo | |
| Fuel Type | Diesel | |
| Displacement | 152.4cu in | 2.5L |
| Alternator | 360000amps |
03 Capacities Specification
| Hydraulic Oil Reservoir | 26gal | 98.5L |
|---|---|---|
| Engine Oil W/ Filter Change | 2.7gal | 10.2L |
| Fuel Tank | 25.9gal | 98L |
| Cooling System | 2.7gal | 10L |
| Tipping Load | 4221.9lb | 1915kg |
| Hydraulic System | 43.5gal | 164.7L |
04 Performance Specification
| Lift Arm Path | Vertical | |
|---|---|---|
| Rated Operating Capacity (Iso 14397) | 2112.1lb | 958kg |
| Dump | 1.8sec | |
| Curl | 1.4sec | |
| Lower (Power Down) | 1.8sec | |
| Raise (Lifting) | 3.2sec |
05 Loader Specification
| Standard Hydraulic Pump Output | 18.5gal/min | 70L/min |
|---|---|---|
| High Flow Pump Output | 30.4gal/min | 115L/min |
| System Pressure | 3336psi | 23000.9kPa |
06 Weights Specification
| Weight | 7253.3lb | 3290kg |
|---|
07 Loader Specification
| Bucket Width | 66in | 1676mm |
|---|
08 Bucket Specification
| Breakout Force, Lift | 4592.3lb | 2083kg |
|---|---|---|
| Landscape Bucket Width | 7.3ft in | 2222mm |
09 Dimensions Dimensions
| Ground Clearance | 8.27in | 210mm |
|---|---|---|
| Wheelbase | 3.52ft in | 1070mm |
| Dump Angle | 42degrees | |
| Dump Height | 7.42ft in | 2260mm |
| Dump Reach | 33.86in | 860mm |
| Height To Hinge Pin | 118.12in | 3000mm |
| Angle Of Departure | 25degrees | |
| Overall Length (L/Bucket) | 9.13ft in | 2780mm |
| Overall Length (W/Bucket) | 11.59ft in | 3530mm |
| Turning Radius | 5.42ft in | 1650mm |
| Turning Radius Front L/Bucket | 3.75ft in | 1140mm |
| Turning Radius Front W/Bucket | 6.86ft in | 2090mm |
| Overall Height | 6.5ft in | 1980mm |
| Attachment Roll Back Angle | 30degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.