Specification sheet Wheel Loader Ref volvo-lm641-wheel-loader

Volvo LM641

The Volvo LM641 is a wheel loader with an operating weight of 17,000 lb (7,711.08 kg), a 80 hp engine, and a 1.25 yd³ (0.96 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
17,000lb
7,711.08kg
Engine power
80hp
59.66kW
Gross Power
Bucket capacity
1.25yd³
0.96m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Volvo LM641 sits above the median for its class:

  • Operating weight 17,000 lb heavier than 73% (n=374)
  • Engine power 80 hp more powerful than 63% (n=367)
  • Bucket capacity 1.3 yd³ smaller-bucket than 57% (n=309)

Scale drawingdrawn to scale · mm

2640B350C5550A
Side elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2244
Engine Model BM- D 42
Gross Power 80hp 59.7kw
Power Measured @ 2300rpm
Max Torque 198lb ft 268.5Nm
Displacement 256.3cu in 4.2L
Torque Measured @ 1300rpm
Aspiration direct injection

02 Operational Specification

Operating Weight 17000lb 7711.1kg
Fuel Capacity 29.1gal 110L
Hydraulic System Fluid Capacity 23.8gal 90L
Turning Radius 18.4ft in 5600mm
Operating Voltage 24V
Tire Size front 16.9-30/14 rear 12.4-24/12

03 Transmission Specification

Transmission Type full powershift
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 18.7mph 30km/h
Max Speed - Reverse 18.7mph 30km/h

04 Hydraulic System Specification

Relief Valve Setting 1422psi 9804.4kPa
Pump Flow Capacity 38.4gal/min 145L/min
Pump Type Hamworthy

05 Bucket Dimensions

Dump Clearance At Max Raise 9.52ft in 2900mm
Bucket Capacity - Heaped 1.25yd3 0.96m3

06 Dimensions Dimensions

Ground Clearance 1.15ft in 350mm
Length With Bucket On Ground 18.21ft in 5550mm
Height To Top Of Cab 8.67ft in 2640mm
Wheelbase 7.71ft in 2350mm
Hinge Pin - Max Height 12.64ft in 3850mm
Reach At Max Lift And Dump 2.47ft in 750mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.