Specification sheet Wheel Loader Ref volvo-lm218td-wheel-loader
Volvo LM218TD
The Volvo LM218TD is a wheel loader with an operating weight of 13,007.28 lb (5,900 kg), a 56 hp engine, and a 2.75 yd³ (2.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,007.28lb
5,900kg
Engine power
56hp
41.8kW
Net Power Bucket capacity
2.75yd³
2.1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Volvo LM218TD sits in the middle of its class:
- Operating weight 13,010 lb heavier than 55% (n=374)
- Engine power 56 hp less powerful than 72% (n=367)
- Bucket capacity 2.8 yd³ larger-bucket than 96% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Net Power | 56hp | 41.8kw |
|---|---|---|
| Gross Power | 60hp | 44.8kw |
| Max Torque | 182lb ft | 246.8Nm |
02 Operational Specification
| Operating Weight | 13007.3lb | 5900kg |
|---|---|---|
| Static Tipping Weight | 6000lb | 2721.6kg |
| Turning Radius | 16.5ft in | 5000mm |
| Tire Size | front 14-30/10 rear 9-20/10 |
03 Transmission Specification
| Number Of Forward Gears | 5 | |
|---|---|---|
| Number Of Reverse Gears | 5 | |
| Max Speed - Forward | 16.2mph | 26km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 1070psi | 7377.4kPa |
|---|---|---|
| Pump Flow Capacity | 34.4gal/min | 130L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.11ft in | 3080mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.75yd3 | 2.1m3 |
| Bucket Capacity - Struck | 0.79yd3 | 0.6m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.15ft in | 350mm |
|---|---|---|
| Length With Bucket On Ground | 16.69ft in | 5085mm |
| Height To Top Of Cab | 8.34ft in | 2540mm |
| Wheelbase | 7.88ft in | 2400mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.