Specification sheet Wheel Loader Ref volvo-l50d-wheel-loader
Volvo L50D
The Volvo L50D is a wheel loader with an operating weight of 18,915.67 lb (8,580 kg), a 101 hp engine, and a 1.57 yd³ (1.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,915.67lb
8,580kg
Engine power
101hp
75.4kW
Net Power Bucket capacity
1.57yd³
1.2m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Volvo L50D sits above the median for its class:
- Operating weight 18,920 lb heavier than 83% (n=374)
- Engine power 101 hp more powerful than 82% (n=367)
- Bucket capacity 1.6 yd³ larger-bucket than 59% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 40 GJE | |
| Net Power | 101hp | 75.4kw |
| Gross Power | 101.5hp | 75.7kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 297.3lb ft | 403Nm |
| Displacement | 244.1cu in | 4L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 18915.7lb | 8580kg |
|---|---|---|
| Fuel Capacity | 39.7gal | 150L |
| Hydraulic System Fluid Capacity | 17.2gal | 65L |
| Engine Oil Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 7.2gal | 27L |
| Transmission Fluid Capacity | 1.9gal | 7L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Static Tipping Weight | 13227.8lb | 6000kg |
| Turning Radius | 17.5ft in | 5330mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5R25 |
03 Transmission Specification
| Transmission Type | hydrostatic transmission. Volvo powershift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 25.5mph | 41km/h |
| Max Speed - Reverse | 25.5mph | 41km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3771psi | 26000kPa |
|---|---|---|
| Pump Flow Capacity | 31.8gal/min | 120L/min |
| Raise Time | 5.4sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3sec | |
| Pump Type | axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.32ft in | 2840mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.57yd3 | 1.2m3 |
| Bucket Width | 7.55ft in | 2300mm |
| Breakout Force | 15691.67lb | 69.8kN |
06 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 380mm |
|---|---|---|
| Length With Bucket On Ground | 21.46ft in | 6540mm |
| Width Over Tires | 7.22ft in | 2200mm |
| Height To Top Of Cab | 9.95ft in | 3030mm |
| Wheelbase | 9.03ft in | 2750mm |
| Hinge Pin - Max Height | 12.34ft in | 3760mm |
| Reach At Max Lift And Dump | 3.32ft in | 1010mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.