Specification sheet Wheel Loader Ref volvo-l30b-pro-wheel-loader

Volvo L30B Pro

The Volvo L30B Pro is a wheel loader with an operating weight of 12,040 lb (5,460 kg), a 68 hp engine, and a 1.2 yd³ (0.92 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
12,040lb
5,460kg
Engine power
68hp
50kW
Net Power
Bucket capacity
1.2yd³
0.92m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Volvo L30B Pro sits in the middle of its class:

  • Operating weight 12,040 lb lighter than 54% (n=374)
  • Engine power 68 hp less powerful than 55% (n=367)
  • Bucket capacity 1.2 yd³ smaller-bucket than 58% (n=309)

Scale drawingdrawn to scale · mm

2710B570C5160A
Side elevation
2710B1815D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2244
Engine Model D3DCDE2
Net Power 68hp 50kw
Gross Power 71hp 52kw
Power Measured @ 2300rpm
Max Torque 178lb ft 241Nm
Displacement 189.8cu in 3.2L
Torque Measured @ 1600rpm
Aspiration Turbocharged

02 Operational Specification

Operating Weight 12040lb 5460kg
Static Tipping Weight 9700lb 4400kg
Turning Radius 6.7ft in 2030mm
Operating Voltage 12V
Alternator Supplied Amperage 80amps
Rear Axle Oscillation 20degrees
Tire Size 400/70 R18

03 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 11.5mph 18.6km/h
Max Speed - Reverse 11.5mph 18.6km/h

04 Hydraulic System Specification

Relief Valve Setting 3625psi 24993.5kPa
Pump Flow Capacity 14.5gal/min 54.9L/min
Raise Time 6.5sec
Dump Time 1.5sec
Lower Time 3.5sec
Pump Type Gear-type pump

05 Bucket Dimensions

Dump Clearance At Max Raise 8.35ft in 2545mm
Bucket Width 6.25ft in 1900mm
Bucket Capacity - Heaped 1.2yd3 0.92m3

06 Dimensions Dimensions

Ground Clearance 1.83ft in 570mm
Length With Bucket On Ground 16.93ft in 5160mm
Width Over Tires 5.96ft in 1815mm
Height To Top Of Cab 8.92ft in 2710mm
Wheelbase 7.08ft in 2150mm
Hinge Pin - Max Height 10.58ft in 3225mm
Reach At Max Lift And Dump 2.35ft in 715mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.