Specification sheet Wheel Loader Ref volvo-l220d-wheel-loader
Volvo L220D
The Volvo L220D is a wheel loader with an operating weight of 67,924.43 lb (30,810 kg), a 349 hp engine, and a 7.33 yd³ (5.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
67,924.43lb
30,810kg
Engine power
349hp
260.3kW
Net Power Bucket capacity
7.33yd³
5.6m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Volvo L220D sits at the heavy end of its class:
- Operating weight 67,920 lb heavier than 90% (n=198)
- Engine power 349 hp more powerful than 92% (n=190)
- Bucket capacity 7.3 yd³ larger-bucket than 94% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 122 KLE | |
| Net Power | 349hp | 260.3kw |
| Gross Power | 352hp | 262.5kw |
| Power Measured @ | 1600rpm | |
| Max Torque | 1224.4lb ft | 1660Nm |
| Displacement | 732.3cu in | 12L |
| Torque Measured @ | 1450rpm | |
| Aspiration | Turbocharged and Intercooled |
02 Operational Specification
| Operating Weight | 67924.5lb | 30810kg |
|---|---|---|
| Fuel Capacity | 87.5gal | 331L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Engine Oil Fluid Capacity | 13.8gal | 52L |
| Cooling System Fluid Capacity | 22gal | 83L |
| Transmission Fluid Capacity | 12.7gal | 48L |
| Front Axle/Diff Fluid Capacity | 20.4gal | 77L |
| Rear Axle/Diff Fluid Capacity | 18.8gal | 71L |
| Static Tipping Weight | 49251.3lb | 22340kg |
| Turning Radius | 25.1ft in | 7640mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 29.5R25 L3 |
03 Transmission Specification
| Transmission Type | Volvo HTE 300 countershaft-type | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.3mph | 34.3km/h |
| Max Speed - Reverse | 21.3mph | 34.3km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3626psi | 25000.4kPa |
|---|---|---|
| Pump Flow Capacity | 59.5gal/min | 225L/min |
| Raise Time | 6.4sec | |
| Dump Time | 1.7sec | |
| Lower Time | 3.2sec | |
| Pump Type | two load-sensing axial piston pumps |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.7ft in | 3260mm |
|---|---|---|
| Bucket Capacity - Heaped | 7.33yd3 | 5.6m3 |
| Bucket Width | 11.16ft in | 3400mm |
| Breakout Force | 49480lb | 49480- |
06 Dimensions Dimensions
| Ground Clearance | 1.81ft in | 550mm |
|---|---|---|
| Length With Bucket On Ground | 28.75ft in | 8760mm |
| Width Over Tires | 10.41ft in | 3170mm |
| Height To Top Of Cab | 11.91ft in | 3630mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 15.33ft in | 4670mm |
| Reach At Max Lift And Dump | 4.3ft in | 1310mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.