Specification sheet Wheel Loader Ref volvo-l180f-wheel-loader
Volvo L180F
The Volvo L180F is a wheel loader with an operating weight of 57,672.93 lb (26,160 kg), a 313.8 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
57,672.93lb
26,160kg
Engine power
313.8hp
234kW
Net Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Volvo L180F sits above the median for its class:
- Operating weight 57,670 lb heavier than 63% (n=198)
- Engine power 314 hp more powerful than 73% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | D12DLAE3 | |
| Net Power | 313.8hp | 234kw |
| Gross Power | 315.2hp | 235kw |
| Power Measured @ | 1500rpm | |
| Max Torque | 1182.4lb ft | 1603Nm |
| Displacement | 732.3cu in | 12L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged and Intercooled |
02 Operational Specification
| Operating Weight | 57673lb | 26160kg |
|---|---|---|
| Fuel Capacity | 88.5gal | 335L |
| Hydraulic System Fluid Capacity | 41.3gal | 156L |
| Engine Oil Fluid Capacity | 12.7gal | 48L |
| Cooling System Fluid Capacity | 11.1gal | 42L |
| Transmission Fluid Capacity | 11.9gal | 45L |
| Front Axle/Diff Fluid Capacity | 11.9gal | 45L |
| Rear Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Static Tipping Weight | 46870.3lb | 21260kg |
| Turning Radius | 24.2ft in | 7365mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 15degrees | |
| Tire Size | 26.5R25 L3 |
03 Transmission Specification
| Transmission Type | Automatic Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.5mph | 36.1km/h |
| Max Speed - Reverse | 22.5mph | 36.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3771psi | 26000.2kPa |
|---|---|---|
| Pump Flow Capacity | 65.3gal/min | 247L/min |
| Raise Time | 6.4sec | |
| Dump Time | 1.8sec | |
| Lower Time | 3.3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.37ft in | 3160mm |
|---|---|---|
| Bucket Width | 10.5ft in | 3200mm |
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.58ft in | 480mm |
|---|---|---|
| Length With Bucket On Ground | 28.58ft in | 8710mm |
| Width Over Tires | 9.68ft in | 2950mm |
| Height To Top Of Cab | 11.75ft in | 3580mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.67ft in | 4470mm |
| Reach At Max Lift And Dump | 4.04ft in | 1230mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.