Specification sheet Wheel Loader Ref volvo-l180e-wheel-loader
Volvo L180E
The Volvo L180E is a wheel loader with an operating weight of 58,202.05 lb (26,400 kg), a 300 hp engine, and a 6.02 yd³ (4.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
58,202.05lb
26,400kg
Engine power
300hp
223.8kW
Net Power Bucket capacity
6.02yd³
4.6m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Volvo L180E sits above the median for its class:
- Operating weight 58,200 lb heavier than 66% (n=198)
- Engine power 300 hp more powerful than 68% (n=190)
- Bucket capacity 6 yd³ larger-bucket than 70% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | D12C LC E2 | |
| Net Power | 300hp | 223.8kw |
| Gross Power | 303hp | 226kw |
| Power Measured @ | 1400rpm | |
| Max Torque | 1253.9lb ft | 1700Nm |
| Displacement | 732.3cu in | 12L |
| Torque Measured @ | 1200rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 58202.1lb | 26400kg |
|---|---|---|
| Fuel Capacity | 97.8gal | 370L |
| Hydraulic System Fluid Capacity | 41.3gal | 156L |
| Engine Oil Fluid Capacity | 12.7gal | 48L |
| Cooling System Fluid Capacity | 18.5gal | 70L |
| Transmission Fluid Capacity | 11.9gal | 45L |
| Front Axle/Diff Fluid Capacity | 11.9gal | 45L |
| Rear Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Static Tipping Weight | 45790.1lb | 20770kg |
| Turning Radius | 24.5ft in | 7455mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 26.5R25 L3 |
03 Transmission Specification
| Transmission Type | Volvo HTE220 | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.2mph | 37.2km/h |
| Max Speed - Reverse | 23.2mph | 37.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3626psi | 25000kPa |
|---|---|---|
| Pump Flow Capacity | 61.9gal/min | 234L/min |
| Raise Time | 7.2sec | |
| Dump Time | 2sec | |
| Lower Time | 3.7sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.68ft in | 2950mm |
|---|---|---|
| Bucket Capacity - Heaped | 6.02yd3 | 4.6m3 |
| Bucket Width | 10.6ft in | 3230mm |
| Breakout Force | 46423.05lb | 206.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 440mm |
|---|---|---|
| Length With Bucket On Ground | 29.73ft in | 9060mm |
| Width Over Tires | 9.68ft in | 2950mm |
| Height To Top Of Cab | 11.75ft in | 3580mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.7ft in | 4480mm |
| Reach At Max Lift And Dump | 4.76ft in | 1450mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.