Specification sheet Wheel Loader Ref volvo-l180d-wheel-loader
Volvo L180D
The Volvo L180D is a wheel loader with an operating weight of 58,135.91 lb (26,370 kg), a 280 hp engine, and a 5.5 yd³ (4.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
58,135.91lb
26,370kg
Engine power
280hp
208.8kW
Net Power Bucket capacity
5.5yd³
4.2m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Volvo L180D sits above the median for its class:
- Operating weight 58,140 lb heavier than 65% (n=198)
- Engine power 280 hp more powerful than 54% (n=190)
- Bucket capacity 5.5 yd³ smaller-bucket than 56% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 122 | |
| Net Power | 280hp | 208.8kw |
| Gross Power | 284hp | 211.8kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 1165.4lb ft | 1580Nm |
| Displacement | 732.3cu in | 12L |
| Torque Measured @ | 900rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 58136lb | 26370kg |
|---|---|---|
| Fuel Capacity | 84.1gal | 318L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Engine Oil Fluid Capacity | 9gal | 34L |
| Cooling System Fluid Capacity | 21.2gal | 80L |
| Transmission Fluid Capacity | 10.1gal | 38L |
| Front Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Rear Axle/Diff Fluid Capacity | 14.3gal | 54L |
| Static Tipping Weight | 46319.2lb | 21010kg |
| Turning Radius | 24.4ft in | 7420mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 26.5R25*L3 |
03 Transmission Specification
| Transmission Type | Volvo HT220 automatic power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.9mph | 35.1km/h |
| Max Speed - Reverse | 21.9mph | 35.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3263.4psi | 22500kPa |
|---|---|---|
| Pump Flow Capacity | 82.7gal/min | 313L/min |
| Raise Time | 6.6sec | |
| Dump Time | 2.5sec | |
| Lower Time | 3.5sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.5ft in | 3200mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.5yd3 | 4.2m3 |
| Bucket Width | 10.5ft in | 3200mm |
| Breakout Force | _- | 210.3kN |
06 Dimensions Dimensions
| Ground Clearance | 1.58ft in | 480mm |
|---|---|---|
| Length With Bucket On Ground | 28.97ft in | 8830mm |
| Width Over Tires | 9.68ft in | 2950mm |
| Height To Top Of Cab | 11.68ft in | 3560mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.74ft in | 4490mm |
| Reach At Max Lift And Dump | 4.53ft in | 1380mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.