Specification sheet Wheel Loader Ref volvo-l180c-wheel-loader
Volvo L180C
The Volvo L180C is a wheel loader with an operating weight of 60,627.12 lb (27,500 kg), a 269 hp engine, and a 6.28 yd³ (4.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
60,627.12lb
27,500kg
Engine power
269hp
200.6kW
Net Power Bucket capacity
6.28yd³
4.8m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Volvo L180C sits above the median for its class:
- Operating weight 60,630 lb heavier than 69% (n=198)
- Engine power 269 hp less powerful than 58% (n=190)
- Bucket capacity 6.3 yd³ larger-bucket than 73% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 122 KHE | |
| Net Power | 269hp | 200.6kw |
| Gross Power | 284hp | 211.8kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 1165.4lb ft | 1580Nm |
| Displacement | 733cu in | 12.1L |
| Torque Measured @ | 900rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 60627.2lb | 27500kg |
|---|---|---|
| Fuel Capacity | 84.1gal | 318L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Engine Oil Fluid Capacity | 9gal | 34L |
| Cooling System Fluid Capacity | 18.5gal | 70L |
| Transmission Fluid Capacity | 9.3gal | 35L |
| Front Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Rear Axle/Diff Fluid Capacity | 14.3gal | 54L |
| Static Tipping Weight | 43700lb | 19822kg |
| Turning Radius | 24.6ft in | 7490mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 26.5R25**L3 |
03 Transmission Specification
| Transmission Type | Volvo HT220 automatic power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.9mph | 35.1km/h |
| Max Speed - Reverse | 15mph | 24km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3363psi | 23187.1kPa |
|---|---|---|
| Pump Flow Capacity | 82.8gal/min | 313.5L/min |
| Raise Time | 6.6sec | |
| Dump Time | 2.5sec | |
| Lower Time | 3.5sec | |
| Pump Type | double vane pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.08ft in | 3070mm |
|---|---|---|
| Bucket Width | 10.5ft in | 3200mm |
| Bucket Capacity - Heaped | 6.28yd3 | 4.8m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.58ft in | 480mm |
|---|---|---|
| Length With Bucket On Ground | 28.06ft in | 8550mm |
| Width Over Tires | 9.68ft in | 2950mm |
| Height To Top Of Cab | 11.68ft in | 3560mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.7ft in | 4480mm |
| Reach At Max Lift And Dump | 4.37ft in | 1330mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.