Specification sheet Wheel Loader Ref volvo-l150e-wheel-loader
Volvo L150E
The Volvo L150E is a wheel loader with an operating weight of 51,455.9 lb (23,340 kg), a 284 hp engine, and a 5.63 yd³ (4.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
51,455.9lb
23,340kg
Engine power
284hp
211.8kW
Net Power Bucket capacity
5.63yd³
4.3m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Volvo L150E sits below the median for its class:
- Operating weight 51,460 lb lighter than 62% (n=198)
- Engine power 284 hp more powerful than 56% (n=190)
- Bucket capacity 5.6 yd³ larger-bucket than 56% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | D9A LB E2 | |
| Net Power | 284hp | 211.8kw |
| Gross Power | 287hp | 214.1kw |
| Power Measured @ | 1600rpm | |
| Max Torque | 1062.1lb ft | 1440Nm |
| Displacement | 573.7cu in | 9.4L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 51455.9lb | 23340kg |
|---|---|---|
| Fuel Capacity | 88.5gal | 335L |
| Hydraulic System Fluid Capacity | 41.3gal | 156L |
| Engine Oil Fluid Capacity | 10.5gal | 39.5L |
| Cooling System Fluid Capacity | 11.8gal | 44.5L |
| Transmission Fluid Capacity | 11.9gal | 45L |
| Front Axle/Diff Fluid Capacity | 11.9gal | 45L |
| Rear Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Static Tipping Weight | 38316.4lb | 17380kg |
| Turning Radius | 24ft in | 7290mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 26.5R25 L3 |
03 Transmission Specification
| Transmission Type | Volvo HTE210 | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.5mph | 39.4km/h |
| Max Speed - Reverse | 24.5mph | 39.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3626psi | 25000kPa |
|---|---|---|
| Pump Flow Capacity | 47.6gal/min | 180L/min |
| Raise Time | 5.9sec | |
| Dump Time | 2sec | |
| Lower Time | 3.7sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.36ft in | 2850mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.63yd3 | 4.3m3 |
| Bucket Width | 9.85ft in | 3000mm |
| Breakout Force | 39588.86lb | 176.1kN |
06 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 29.17ft in | 8890mm |
| Width Over Tires | 9.68ft in | 2950mm |
| Height To Top Of Cab | 11.75ft in | 3580mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.28ft in | 4350mm |
| Reach At Max Lift And Dump | 4.7ft in | 1430mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.