Specification sheet Wheel Loader Ref volvo-l150c-wheel-loader
Volvo L150C
The Volvo L150C is a wheel loader with an operating weight of 56,879.26 lb (25,800 kg), a 249 hp engine, and a 5.2 yd³ (3.98 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
56,879.26lb
25,800kg
Engine power
249hp
185.7kW
Net Power Bucket capacity
5.2yd³
3.98m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Volvo L150C sits above the median for its class:
- Operating weight 56,880 lb heavier than 61% (n=198)
- Engine power 249 hp less powerful than 83% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 74% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 103 KCE | |
| Net Power | 249hp | 185.7kw |
| Gross Power | 257hp | 191.7kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 1025lb ft | 1389.8Nm |
| Displacement | 586cu in | 9.7L |
| Torque Measured @ | 1100rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 56879.3lb | 25800kg |
|---|---|---|
| Fuel Capacity | 84.1gal | 318L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Engine Oil Fluid Capacity | 7.2gal | 27L |
| Cooling System Fluid Capacity | 18.5gal | 70L |
| Transmission Fluid Capacity | 9.3gal | 35L |
| Front Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Rear Axle/Diff Fluid Capacity | 14.3gal | 54L |
| Static Tipping Weight | 36640lb | 16619.7kg |
| Turning Radius | 24.3ft in | 7395mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 26.5R25*L3 |
03 Transmission Specification
| Transmission Type | automatic power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20.9mph | 33.7km/h |
| Max Speed - Reverse | 14.3mph | 23.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21001.5kPa |
|---|---|---|
| Pump Flow Capacity | 82.7gal/min | 313.1L/min |
| Raise Time | 6.7sec | |
| Dump Time | 1.9sec | |
| Lower Time | 3.2sec | |
| Pump Type | vane pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.98ft in | 3040mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.2yd3 | 3.98m3 |
| Bucket Width | 10.5ft in | 3200mm |
| Breakout Force | 39630lb | 39630- |
06 Dimensions Dimensions
| Ground Clearance | 1.58ft in | 480mm |
|---|---|---|
| Length With Bucket On Ground | 27.04ft in | 8240mm |
| Width Over Tires | 9.68ft in | 2950mm |
| Height To Top Of Cab | 11.68ft in | 3560mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.28ft in | 4350mm |
| Reach At Max Lift And Dump | 4.01ft in | 1220mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.