Specification sheet Wheel Loader Ref volvo-l120d-wheel-loader
Volvo L120D
The Volvo L120D is a wheel loader with an operating weight of 41,623.28 lb (18,880 kg), a 201 hp engine, and a 4.06 yd³ (3.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
41,623.28lb
18,880kg
Engine power
201hp
149.9kW
Net Power Bucket capacity
4.06yd³
3.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Volvo L120D sits at the heavy end of its class:
- Operating weight 41,620 lb heavier than 90% (n=439)
- Engine power 201 hp more powerful than 79% (n=408)
- Bucket capacity 4.1 yd³ larger-bucket than 79% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 73 KDE | |
| Net Power | 201hp | 149.9kw |
| Gross Power | 208hp | 155.2kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 682.3lb ft | 925Nm |
| Displacement | 408.9cu in | 6.7L |
| Torque Measured @ | 1100rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 41623.3lb | 18880kg |
|---|---|---|
| Fuel Capacity | 67.4gal | 255L |
| Hydraulic System Fluid Capacity | 38.4gal | 145L |
| Engine Oil Fluid Capacity | 6.4gal | 24L |
| Cooling System Fluid Capacity | 17.2gal | 65L |
| Transmission Fluid Capacity | 9.3gal | 35L |
| Front Axle/Diff Fluid Capacity | 9.6gal | 36L |
| Rear Axle/Diff Fluid Capacity | 10.9gal | 41L |
| Static Tipping Weight | 31305.7lb | 14200kg |
| Turning Radius | 20.9ft in | 6340mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 23.5R25*L2 |
03 Transmission Specification
| Transmission Type | Volvo HT 205 | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.1mph | 35.5km/h |
| Max Speed - Reverse | 22.1mph | 35.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3263.4psi | 22500kPa |
|---|---|---|
| Pump Flow Capacity | 72.7gal/min | 275L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.7sec | |
| Lower Time | 2.8sec | |
| Pump Type | vane pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.59ft in | 2920mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.06yd3 | 3.1m3 |
| Bucket Width | 9.45ft in | 2880mm |
| Breakout Force | 33878.71lb | 150.7kN |
06 Dimensions Dimensions
| Ground Clearance | 1.38ft in | 420mm |
|---|---|---|
| Length With Bucket On Ground | 26.68ft in | 8130mm |
| Width Over Tires | 8.8ft in | 2680mm |
| Height To Top Of Cab | 11ft in | 3350mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.49ft in | 4110mm |
| Reach At Max Lift And Dump | 3.81ft in | 1160mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.