Volvo ECR 25 D
The Volvo ECR 25 D is a mini excavator with an operating weight of 5,737 lb, and a 15.6 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Volvo ECR 25 D sits below the median for its class:
- Operating weight 5,740 lb lighter than 62% (n=438)
- Engine power 16 hp less powerful than 80% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Boom/Stick Option (Hex) 1 | Arm - 1050 mm41.3 ft in |
|---|
02 Boom/Stick Option (Hex) 2 Specification
| Boom/Stick Option (Hex) 2 | Arm - 1350 mm, 53.1.1ft in |
|---|
03 Dimensions Specification
| Tail Swing Radius | 3.55ft in | 1,082mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Length | 75.04in | 1,906mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Width – Rubber | 9.85in | 250mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Shoe Width | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
| Track Tension | by grease piston | |
| Drawbar Pull | 446020.91lb | 202,311.52kg‖ — metric converted from the published imperial value |
| Number Of Bottom Rollers Per Side | 4 | |
| Number Of Top Rollers Per Side | 0 |
05 Electrical System Specification
| Battery Capacity | 64Ah | |
|---|---|---|
| Voltage | 12 VV | |
| Batteries | 1 X 12V |
06 Swing System Specification
| Max - Slew Speed | 9.5rpm | |
|---|---|---|
| Max - Slew Torque | 224.3lb ft |
07 Engine Specification
| Max Power | 2400rpm | |
|---|---|---|
| Fuel Tank | 5.3gal | 20l‖ — metric converted from the published imperial value |
| Number Of Cylinders | 3 | |
| Engine Model | DO.9A | |
| Rated Engine Speed | 2420rpm | |
| Gross Power | 15.6hp | 11.6kw‖ — metric converted from the published imperial value |
| Displacement | 898cu in | 14,716cm3‖ — metric converted from the published imperial value |
| Max Torque | 1475.2lb ft | |
| Bore | 2.9in | 74mm‖ — metric converted from the published imperial value |
| Stroke | 2.9in | 74mm‖ — metric converted from the published imperial value |
08 Capacities Specification
| Travel Reduction | 0.7gal | 3l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank - Total System | 5.6gal | 21l‖ — metric converted from the published imperial value |
| Hydraulic Tank | 4gal | 15l‖ — metric converted from the published imperial value |
| Engine Oil | 1gal | 4l‖ — metric converted from the published imperial value |
| Engine Coolant | 1.1gal | 4.2l‖ — metric converted from the published imperial value |
09 Operational Specification
| Operating Weight | 5737lb | 2,602kg‖ — metric converted from the published imperial value |
|---|
10 Performance Specification
| Travel Speed Low | 2.5mph | 4km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speed - High | 4.7mph | 7.6km/h‖ — metric converted from the published imperial value |
| Gradeability | 30% |
11 Swing Mechanism Specification
| Swing Speed | 9.5rpm | |
|---|---|---|
| Swing Torque | 224.3lb ft |
12 Loader Specification
| Breakout Force | 4554 (IBF) |
|---|
13 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.