Volvo EC 27 D
The Volvo EC 27 D is a mini excavator with an operating weight of 6,019 lb, a 15.6 hp engine, and a dig depth of 8.91 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Volvo EC 27 D sits in the middle of its class:
- Operating weight 6,020 lb lighter than 58% (n=438)
- Engine power 16 hp less powerful than 80% (n=448)
- Dig depth 8.9 ft shallower-digging than 53% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 14.22ft in | 4,334mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Vertical Wall Digging Depth | 6.43ft in | 1,960mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 8.91ft in | 2,716mm‖ — metric converted from the published imperial value |
| Max Digging Reach | 14.1ft in | 4,298mm‖ — metric converted from the published imperial value |
| Max Digging Reach On Ground | 14.1ft in | 4,298mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 10.15ft in | 3,094mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Arm - 1200mm,47 ft in |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 15.09ft in | 4,599mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Vertical Wall Digging Depth | 8.54ft in | 2,603mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.14ft in | 3,091mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 10.53ft in | 3,210mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | Arm - 1500 mm, 5.7 ft in | |
| Max Digging Reach | 15.31ft in | 4,666mm‖ — metric converted from the published imperial value |
| Max Digging Reach On Ground | 15.31ft in | 4,666mm‖ — metric converted from the published imperial value |
03 Dimensions Specification
| Tail Swing Radius | 3.55ft in | 1,082mm‖ — metric converted from the published imperial value |
|---|---|---|
| Dozer Blade Width | 12.29in | 312.2mm‖ — metric converted from the published imperial value |
| Minimum Ground Clearance | 56.7in | 1,440mm‖ — metric converted from the published imperial value |
| Transport Length | 173.23in | 4,400mm‖ — metric converted from the published imperial value |
| Overall Height Of Engine Hood | 5.16ft in | 1,573mm‖ — metric converted from the published imperial value |
| Overall Length | 12.91ft in | 3,935mm‖ — metric converted from the published imperial value |
| Shoe Width | 1.84ft in | 561mm‖ — metric converted from the published imperial value |
| Track Length | 75.04in | 1,906mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Width - Steel | 300 | |
|---|---|---|
| Shoe Width – Rubber | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
| Number Of Top Rollers Per Side | 1 | |
| Number Of Bottom Rollers Per Side | 3 | |
| Drawbar Pull | 562022.31lb | 254,928.82kg‖ — metric converted from the published imperial value |
| Track Tension | by grease piston |
05 Speeds Specification
| Speed -On Road | 30mph | 48km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Speed -Off Road | 20mph | 32km/h‖ — metric converted from the published imperial value |
| Creep | 10mph | 16km/h‖ — metric converted from the published imperial value |
| Min Turning Radius | 5.1ft in | 1,554mm‖ — metric converted from the published imperial value |
06 Electrical System Specification
| Battery Capacity | 70Ah | |
|---|---|---|
| Voltage | 12 VV | |
| Battery | 12V |
07 Swing System Specification
| Max - Slew Speed | 9.4rpm | |
|---|---|---|
| Max - Slew Torque | 357.8lb ft |
08 Engine Specification
| Max Power | 2400rpm | |
|---|---|---|
| Fuel Tank | 7.4gal | 28l‖ — metric converted from the published imperial value |
| Number Of Cylinders | 3 | |
| Engine Model | D1.1A | |
| Rated Engine Speed | 1600rpm | |
| Gross Power | 15.6hp | 11.6kw‖ — metric converted from the published imperial value |
| Displacement | 1123cu in | 18,403cm3‖ — metric converted from the published imperial value |
| Max Torque | 52.7lb ft | |
| Bore | 3.1in | 79mm‖ — metric converted from the published imperial value |
| Stroke | 3.1in | 79mm‖ — metric converted from the published imperial value |
09 Capacities Specification
| Travel Reduction | 0.4gal | 2l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank - Total System | 16.4gal | 62.1l‖ — metric converted from the published imperial value |
| Hydraulic Tank | 8.5gal | 32l‖ — metric converted from the published imperial value |
| Engine Oil | 1.9gal | 7.2l‖ — metric converted from the published imperial value |
| Engine Coolant | 1.9gal | 7.2l‖ — metric converted from the published imperial value |
10 Operational Specification
| Operating Weight | 6019lb | 2,730kg‖ — metric converted from the published imperial value |
|---|
11 Performance Specification
| Travel Speed Low | 2.6mph | 4.2km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speed - High | 4.8mph | 7.7km/h‖ — metric converted from the published imperial value |
| Gradeability | 30% |
12 Loader Specification
| Breakout Force | 5528 (IBF) |
|---|
13 Buckets Specification
| Reference Bucket Capacity | 0.4yd3 |
|---|
14 Hydraulic System Specification
| Main Pump - Maximum Flow | 15.4gal/min | 58.3l/min‖ — metric converted from the published imperial value |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.