Specification sheet Wheel Loader Ref volvo-bm-lm846-wheel-loader

Volvo BM LM846

The Volvo BM LM846 is a wheel loader with an operating weight of 22,487.15 lb (10,200 kg), a 120 hp engine, and a 6.54 yd³ (5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
22,487.15lb
10,200kg
Engine power
120hp
89.49kW
Gross Power
Bucket capacity
6.54yd³
5m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Volvo BM LM846 sits at the compact end of its class:

  • Operating weight 22,490 lb lighter than 98% (n=439)
  • Engine power 120 hp less powerful than 90% (n=408)
  • Bucket capacity 6.5 yd³ larger-bucket than 98% (n=387)

Scale drawingdrawn to scale · mm

3000B500C6500A
Side elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2244
Engine Model D 50 B
Gross Power 120hp 89.5kw
Power Measured @ 1600rpm
Max Torque 275lb ft 372.9Nm
Displacement 313cu in 5.2L
Torque Measured @ 1600rpm
Aspiration direct injection

02 Operational Specification

Operating Weight 22487.2lb 10200kg
Fuel Capacity 51.6gal 195L
Static Tipping Weight 14991.5lb 6800kg
Turning Radius 16.1ft in 4900mm
Operating Voltage 24V
Tire Size 20.5-25/12

03 Transmission Specification

Transmission Type full power-shift
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 18.7mph 30km/h
Max Speed - Reverse 18.7mph 30km/h

04 Hydraulic System Specification

Relief Valve Setting 1700psi 11721.1kPa
Pump Flow Capacity 58.2gal/min 220L/min
Pump Type Hamworthy

05 Bucket Dimensions

Dump Clearance At Max Raise 9.68ft in 2950mm
Bucket Capacity - Struck 2.23yd3 1.7m3
Bucket Width 8.21ft in 2500mm
Bucket Capacity - Heaped 6.54yd3 5m3

06 Dimensions Dimensions

Ground Clearance 1.65ft in 500mm
Length With Bucket On Ground 21.33ft in 6500mm
Height To Top Of Cab 9.85ft in 3000mm
Wheelbase 8.86ft in 2700mm
Hinge Pin - Max Height 12.57ft in 3830mm
Reach At Max Lift And Dump 3.38ft in 1030mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.