Specification sheet Wheel Loader Ref volvo-bm-lm845-wheel-loader

Volvo BM LM845

The Volvo BM LM845 is a wheel loader with an operating weight of 21,054.15 lb (9,550 kg), a 112 hp engine, and a 6.54 yd³ (5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
21,054.15lb
9,550kg
Engine power
112hp
83.52kW
Gross Power
Bucket capacity
6.54yd³
5m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Volvo BM LM845 sits at the heavy end of its class:

  • Operating weight 21,050 lb heavier than 95% (n=374)
  • Engine power 112 hp more powerful than 91% (n=367)
  • Bucket capacity 6.5 yd³ larger-bucket than 100% (n=309)

Scale drawingdrawn to scale · mm

3000B500C6500A
Side elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2244
Engine Model D 50 B
Gross Power 112hp 83.6kw
Power Measured @ 2400rpm
Max Torque 189.5lb ft 256.8Nm
Displacement 313.1cu in 5.2L
Torque Measured @ 1700rpm
Aspiration direct injection

02 Operational Specification

Operating Weight 21054.2lb 9550kg
Fuel Capacity 51.6gal 195L
Static Tipping Weight 13007.3lb 5900kg
Turning Radius 16.1ft in 4900mm
Operating Voltage 24V
Tire Size Front 18.4-34/14 Rear 16.9-30/14

03 Transmission Specification

Transmission Type Full Powershift
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 18.6mph 30km/h
Max Speed - Reverse 18.6mph 30km/h

04 Hydraulic System Specification

Relief Valve Setting 1700psi 11721.1kPa
Pump Flow Capacity 58.2gal/min 220L/min
Pump Type Hamworthy

05 Bucket Dimensions

Dump Clearance At Max Raise 9.68ft in 2950mm
Bucket Capacity - Struck 2.23yd3 1.7m3
Bucket Capacity - Heaped 6.54yd3 5m3

06 Dimensions Dimensions

Ground Clearance 1.65ft in 500mm
Length With Bucket On Ground 21.33ft in 6500mm
Height To Top Of Cab 9.85ft in 3000mm
Wheelbase 8.86ft in 2700mm
Hinge Pin - Max Height 12.57ft in 3830mm
Reach At Max Lift And Dump 3.19ft in 970mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.