Specification sheet Wheel Loader Ref volvo-bm-lm840-wheel-loader
Volvo BM LM840
The Volvo BM LM840 is a wheel loader with an operating weight of 21,100 lb (9,570.8 kg), a 110 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
21,100lb
9,570.8kg
Engine power
110hp
82.03kW
Gross Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Volvo BM LM840 sits at the heavy end of its class:
- Operating weight 21,100 lb heavier than 95% (n=374)
- Engine power 110 hp more powerful than 89% (n=367)
- Bucket capacity 5.2 yd³ larger-bucket than 99% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | D 50A | |
| Gross Power | 110hp | 82.1kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 261lb ft | 353.9Nm |
| Torque Measured @ | 1500rpm | |
| Aspiration | direct |
02 Operational Specification
| Operating Weight | 21100lb | 9570.8kg |
|---|---|---|
| Static Tipping Weight | 9300lb | 4218.5kg |
| Turning Radius | 18.1ft in | 5500mm |
| Tire Size | front 18.4-34/14 rear 14.9-24/10 |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 16.5mph | 26.5km/h |
| Max Speed - Reverse | 16.5mph | 26.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 1350psi | 9308kPa |
|---|---|---|
| Pump Flow Capacity | 58.2gal/min | 220L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.18ft in | 3100mm |
|---|---|---|
| Bucket Capacity - Struck | 1.71yd3 | 1.3m3 |
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.27ft in | 385mm |
|---|---|---|
| Length With Bucket On Ground | 18.87ft in | 5750mm |
| Height To Top Of Cab | 8.86ft in | 2700mm |
| Wheelbase | 7.98ft in | 2430mm |
| Hinge Pin - Max Height | 12.8ft in | 3900mm |
| Reach At Max Lift And Dump | 3.29ft in | 1000mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.