Specification sheet Wheel Loader Ref volvo-bm-lm620-wheel-loader
Volvo BM LM620
The Volvo BM LM620 is a wheel loader with an operating weight of 13,900 lb (6,304.94 kg), a 63 hp engine, and a 3.9 yd³ (2.99 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,900lb
6,304.94kg
Engine power
63hp
47kW
Net Power Bucket capacity
3.9yd³
2.99m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Volvo BM LM620 sits above the median for its class:
- Operating weight 13,900 lb heavier than 61% (n=374)
- Engine power 63 hp less powerful than 59% (n=367)
- Bucket capacity 3.9 yd³ larger-bucket than 97% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Model | BM1113A LH | |
| Net Power | 63hp | 47kw |
| Gross Power | 69hp | 51.5kw |
| Max Torque | 18.5lb ft | 25Nm |
| Displacement | 230cu in | 3.8L |
| Aspiration | direct injection |
02 Operational Specification
| Operating Weight | 13900lb | 6305kg |
|---|---|---|
| Turning Radius | 16ft in | 4876.8mm |
| Tire Size | front 16.9-30/10 rear 9.00-20/10 |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 18.4mph | 29.7km/h |
| Max Speed - Reverse | 18.4mph | 29.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 1280psi | 8825.3kPa |
|---|---|---|
| Pump Flow Capacity | 37gal/min | 140L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.5ft in | 2895.6mm |
|---|---|---|
| Bucket Capacity - Struck | 0.9yd3 | 0.69m3 |
| Bucket Capacity - Heaped | 3.9yd3 | 2.99m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.08ft in | 329.19mm |
|---|---|---|
| Length With Bucket On Ground | 17.83ft in | 5434.59mm |
| Height To Top Of Cab | 8.25ft in | 2514.6mm |
| Wheelbase | 7.5ft in | 2286mm |
| Hinge Pin - Max Height | 12.58ft in | 3834.39mm |
| Reach At Max Lift And Dump | 2.08ft in | 633.99mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.