Specification sheet Wheel Loader Ref volvo-bm-lm218-wheel-loader

Volvo BM LM218

The Volvo BM LM218 is a wheel loader with an operating weight of 12,600 lb (5,715.27 kg), a 56 hp engine, and a 2.75 yd³ (2.1 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
12,600lb
5,715.27kg
Engine power
56hp
41.8kW
Net Power
Bucket capacity
2.75yd³
2.1m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Volvo BM LM218 sits in the middle of its class:

  • Operating weight 12,600 lb heavier than 50% (n=374)
  • Engine power 56 hp less powerful than 72% (n=367)
  • Bucket capacity 2.8 yd³ larger-bucket than 96% (n=309)

Scale drawingdrawn to scale · mm

2540B350C5125A
Side elevation

01 Engine Specification

Number Of Cylinders 3
Engine Model BM 1113
Net Power 56hp 41.8kw
Gross Power 63hp 47kw
Power Measured @ 1800rpm
Max Torque 182lb ft 246.8Nm
Displacement 230.7cu in 3.8L
Torque Measured @ 1100rpm

02 Operational Specification

Operating Weight 12600lb 5715.3kg
Static Tipping Weight 5291.1lb 2400kg
Turning Radius 16.5ft in 5000mm
Operating Voltage 12V
Tire Size front 16.9-30/10 rear 9-20/10

03 Transmission Specification

Number Of Forward Gears 5
Number Of Reverse Gears 5
Max Speed - Forward 16.2mph 26km/h
Max Speed - Reverse 12.5mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 1070psi 7377.4kPa
Pump Flow Capacity 34.4gal/min 130L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 10.11ft in 3080mm
Breakout Force 584503.21lb 2600kN
Bucket Capacity - Heaped 2.75yd3 2.1m3
Bucket Capacity - Struck 0.79yd3 0.6m3

06 Dimensions Dimensions

Ground Clearance 1.15ft in 350mm
Length With Bucket On Ground 16.82ft in 5125mm
Height To Top Of Cab 8.34ft in 2540mm
Wheelbase 7.55ft in 2300mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.