Specification sheet Wheel Loader Ref volvo-bm-lm1640-wheel-loader
Volvo BM LM1640
The Volvo BM LM1640 is a wheel loader with an operating weight of 36,376.28 lb (16,500 kg), a 202 hp engine, and a 3.93 yd³ (3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
36,376.28lb
16,500kg
Engine power
202hp
150.7kW
Net Power Bucket capacity
3.93yd³
3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Volvo BM LM1640 sits above the median for its class:
- Operating weight 36,380 lb heavier than 71% (n=439)
- Engine power 202 hp more powerful than 79% (n=408)
- Bucket capacity 3.9 yd³ larger-bucket than 72% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | D11 R 41 | |
| Net Power | 202hp | 150.7kw |
| Gross Power | 215hp | 160.4kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 570lb ft | 772.9Nm |
| Torque Measured @ | 1200rpm |
02 Operational Specification
| Operating Weight | 36376.3lb | 16500kg |
|---|---|---|
| Static Tipping Weight | 23810lb | 10800kg |
| Turning Radius | 20.7ft in | 6300mm |
| Tire Size | 23.5-25/16 |
03 Transmission Specification
| Transmission Type | hydraulically operated planetary gearbox | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 26.1mph | 42km/h |
| Max Speed - Reverse | 26.1mph | 42km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 1990psi | 13720.6kPa |
|---|---|---|
| Pump Flow Capacity | 95.2gal/min | 360L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.68ft in | 2950mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.93yd3 | 3m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 26.09ft in | 7950mm |
| Height To Top Of Cab | 10.5ft in | 3200mm |
| Wheelbase | 11.39ft in | 3470mm |
| Hinge Pin - Max Height | 13.13ft in | 4000mm |
| Reach At Max Lift And Dump | 3.78ft in | 1150mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.