Specification sheet Wheel Loader Ref volvo-bm-654-wheel-loader

Volvo BM 654

The Volvo BM 654 is a wheel loader with an operating weight of 16,534.67 lb (7,500 kg), a 113 hp engine, and a 1.44 yd³ (1.11 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
16,534.67lb
7,500kg
Engine power
113hp
84.27kW
Gross Power
Bucket capacity
1.44yd³
1.11m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Volvo BM 654 sits above the median for its class:

  • Operating weight 16,530 lb heavier than 70% (n=374)
  • Engine power 113 hp more powerful than 91% (n=367)
  • Bucket capacity 1.4 yd³ larger-bucket than 52% (n=309)

Scale drawingdrawn to scale · mm

2770B350C5460A
Side elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2244
Engine Model D 50 A
Gross Power 113hp 84.3kw
Power Measured @ 2500rpm
Max Torque 272.9lb ft 370Nm

02 Operational Specification

Operating Weight 16534.7lb 7500kg
Static Tipping Weight 8598.1lb 3900kg
Tire Size 14X24/12

03 Transmission Specification

Transmission Type power shift
Number Of Forward Gears 2
Number Of Reverse Gears 1
Max Speed - Forward 18.7mph 30km/h
Max Speed - Reverse 7.5mph 12km/h

04 Hydraulic System Specification

Relief Valve Setting 1849psi 12748.4kPa
Pump Flow Capacity 40.2gal/min 152L/min
Raise Time 6sec
Lower Time 4sec

05 Bucket Dimensions

Dump Clearance At Max Raise 8.24ft in 2510mm
Bucket Width 6.83ft in 2080mm
Bucket Capacity - Heaped 1.44yd3 1.11m3

06 Dimensions Dimensions

Ground Clearance 1.15ft in 350mm
Length With Bucket On Ground 17.92ft in 5460mm
Height To Top Of Cab 9.09ft in 2770mm
Wheelbase 6.7ft in 2040mm
Hinge Pin - Max Height 10.7ft in 3260mm
Reach At Max Lift And Dump 2.99ft in 910mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.