Specification sheet Wheel Loader Ref volvo-bm-4400-wheel-loader
Volvo BM 4400
The Volvo BM 4400 is a wheel loader with an operating weight of 24,581.55 lb (11,150 kg), a 128 hp engine, and a 2.49 yd³ (1.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
24,581.55lb
11,150kg
Engine power
128hp
95.5kW
Net Power Bucket capacity
2.49yd³
1.9m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Volvo BM 4400 sits at the compact end of its class:
- Operating weight 24,580 lb lighter than 86% (n=439)
- Engine power 128 hp less powerful than 86% (n=408)
- Bucket capacity 2.5 yd³ smaller-bucket than 85% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 60 B | |
| Net Power | 128hp | 95.5kw |
| Gross Power | 143hp | 106.7kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 342.3lb ft | 464Nm |
| Displacement | 334.5cu in | 5.5L |
| Torque Measured @ | 1600rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 24581.6lb | 11150kg |
|---|---|---|
| Fuel Capacity | 51.6gal | 195L |
| Hydraulic System Fluid Capacity | 27.8gal | 105L |
| Engine Oil Fluid Capacity | 4gal | 15L |
| Cooling System Fluid Capacity | 7.7gal | 29L |
| Transmission Fluid Capacity | 6.4gal | 24L |
| Front Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Rear Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Static Tipping Weight | 17747.3lb | 8050kg |
| Turning Radius | 17.1ft in | 5200mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 45amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 20.5R25 |
03 Transmission Specification
| Transmission Type | power-shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 24.3mph | 39km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2130psi | 14685.9kPa |
|---|---|---|
| Pump Flow Capacity | 55.5gal/min | 210L/min |
| Raise Time | 6.4sec | |
| Dump Time | 4sec | |
| Lower Time | 3.8sec | |
| Pump Type | Vane pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.49ft in | 2890mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.49yd3 | 1.9m3 |
| Bucket Width | 8.21ft in | 2500mm |
| Breakout Force | 19840lb | 88.26kN |
06 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 430mm |
|---|---|---|
| Length With Bucket On Ground | 21.89ft in | 6670mm |
| Width Over Tires | 8.17ft in | 2490mm |
| Height To Top Of Cab | 9.9ft in | 3015mm |
| Wheelbase | 9.39ft in | 2860mm |
| Hinge Pin - Max Height | 12.55ft in | 3825mm |
| Reach At Max Lift And Dump | 3.29ft in | 1000mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.