Specification sheet Wheel Loader Ref volvo-bm-4300b-wheel-loader
Volvo BM 4300B
The Volvo BM 4300B is a wheel loader with an operating weight of 20,943.92 lb (9,500 kg), a 110 hp engine, and a 1.97 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,943.92lb
9,500kg
Engine power
110hp
82.1kW
Net Power Bucket capacity
1.97yd³
1.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Volvo BM 4300B sits at the heavy end of its class:
- Operating weight 20,940 lb heavier than 94% (n=374)
- Engine power 110 hp more powerful than 89% (n=367)
- Bucket capacity 2 yd³ larger-bucket than 78% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | BM TD 45 B | |
| Net Power | 110hp | 82.1kw |
| Gross Power | 118hp | 88kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 313.5lb ft | 425Nm |
| Displacement | 273.4cu in | 4.5L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 20944lb | 9500kg |
|---|---|---|
| Fuel Capacity | 50.2gal | 190L |
| Hydraulic System Fluid Capacity | 34.4gal | 130L |
| Engine Oil Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 6.1gal | 23L |
| Transmission Fluid Capacity | 7.2gal | 27L |
| Front Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Rear Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Static Tipping Weight | 14418.3lb | 6540kg |
| Turning Radius | 16.5ft in | 5000mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 17.5R25/12 |
03 Transmission Specification
| Transmission Type | power-shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23mph | 37km/h |
| Max Speed - Reverse | 23mph | 37km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2320psi | 15995.9kPa |
|---|---|---|
| Pump Flow Capacity | 50.2gal/min | 190L/min |
| Raise Time | 4.8sec | |
| Dump Time | 3.3sec | |
| Lower Time | 2.9sec | |
| Pump Type | Vane pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.39ft in | 2860mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Bucket Width | 7.98ft in | 2430mm |
| Breakout Force | 18510lb | 82.34kN |
06 Dimensions Dimensions
| Ground Clearance | 1.2ft in | 365mm |
|---|---|---|
| Length With Bucket On Ground | 21.36ft in | 6510mm |
| Width Over Tires | 7.58ft in | 2310mm |
| Height To Top Of Cab | 9.81ft in | 2990mm |
| Wheelbase | 8.86ft in | 2700mm |
| Hinge Pin - Max Height | 11.95ft in | 3640mm |
| Reach At Max Lift And Dump | 3.32ft in | 1010mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.