Specification sheet Wheel Loader Ref volvo-bm-1254-wheel-loader

Volvo BM 1254

The Volvo BM 1254 is a wheel loader with an operating weight of 30,423.8 lb (13,800 kg), a 200 hp engine, and a 3.14 yd³ (2.4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
30,423.8lb
13,800kg
Engine power
200hp
149.14kW
Gross Power
Bucket capacity
3.14yd³
2.4m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Volvo BM 1254 sits in the middle of its class:

  • Operating weight 30,420 lb lighter than 52% (n=439)
  • Engine power 200 hp more powerful than 78% (n=408)
  • Bucket capacity 3.1 yd³ smaller-bucket than 53% (n=387)

Scale drawingdrawn to scale · mm

3030B400C6450A
Side elevation
3030B2580D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2244
Engine Model D 100 B
Gross Power 200hp 149.2kw
Power Measured @ 2200rpm
Max Torque 514.1lb ft 697Nm
Torque Measured @ 1400rpm

02 Operational Specification

Operating Weight 30423.8lb 13800kg
Static Tipping Weight 18298.4lb 8300kg
Turning Radius 25ft in 7600mm
Tire Size 18X25/16SGEM

03 Transmission Specification

Transmission Type planetary
Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed - Forward 18.7mph 30km/h
Max Speed - Reverse 18.7mph 30km/h

04 Hydraulic System Specification

Relief Valve Setting 2.2psi 14.7kPa
Pump Flow Capacity 7gal/min 26.5L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 9.72ft in 2960mm
Bucket Capacity - Heaped 3.14yd3 2.4m3

06 Dimensions Dimensions

Ground Clearance 1.32ft in 400mm
Length With Bucket On Ground 21.17ft in 6450mm
Width Over Tires 8.47ft in 2580mm
Height To Top Of Cab 9.95ft in 3030mm
Wheelbase 8.47ft in 2580mm
Hinge Pin - Max Height 12.64ft in 3850mm
Reach At Max Lift And Dump 3.61ft in 1100mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.