Specification sheet Wheel Loader Ref venieri-463f-wheel-loader
Venieri 463F
The Venieri 463F is a wheel loader with an operating weight of 11,904.97 lb (5,400 kg), a 77.8 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,904.97lb
5,400kg
Engine power
77.8hp
58kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Venieri 463F sits in the middle of its class:
- Operating weight 11,900 lb lighter than 55% (n=374)
- Engine power 78 hp more powerful than 62% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 804C-33T | |
| Net Power | 77.8hp | 58kw |
| Displacement | 201.4cu in | 3.3L |
02 Operational Specification
| Operating Weight | 11905lb | 5400kg |
|---|---|---|
| Static Tipping Weight | 7495.8lb | 3400kg |
| Turning Radius | 7.5ft in | 2275mm |
| Tire Size | 16.7x20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 16.8mph | 27km/h |
| Max Speed - Reverse | 16.8mph | 27km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.7ft in | 2650mm |
|---|---|---|
| Bucket Width | 6.4ft in | 1950mm |
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 380mm |
|---|---|---|
| Length With Bucket On Ground | 16.9ft in | 5150mm |
| Width Over Tires | 6.11ft in | 1860mm |
| Height To Top Of Cab | 9.19ft in | 2800mm |
| Wheelbase | 7.06ft in | 2150mm |
| Reach At Max Lift And Dump | 2.63ft in | 800mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.