Specification sheet Wheel Loader Ref venieri-363f-wheel-loader
Venieri 363F
The Venieri 363F is a wheel loader with an operating weight of 11,353.81 lb (5,150 kg), a 60.4 hp engine, and a 1.05 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,353.81lb
5,150kg
Engine power
60.4hp
45kW
Net Power Bucket capacity
1.05yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Venieri 363F sits in the middle of its class:
- Operating weight 11,350 lb lighter than 59% (n=374)
- Engine power 60 hp less powerful than 63% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 804C-33 | |
| Net Power | 60.4hp | 45kw |
| Displacement | 201.4cu in | 3.3L |
02 Operational Specification
| Operating Weight | 11353.9lb | 5150kg |
|---|---|---|
| Static Tipping Weight | 6393.5lb | 2900kg |
| Turning Radius | 7.4ft in | 2250mm |
| Tire Size | 12.5x20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 15.6mph | 25km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.54ft in | 2600mm |
|---|---|---|
| Bucket Width | 6.24ft in | 1900mm |
| Bucket Capacity - Heaped | 1.05yd3 | 0.8m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.15ft in | 350mm |
|---|---|---|
| Length With Bucket On Ground | 16.57ft in | 5050mm |
| Width Over Tires | 6.01ft in | 1830mm |
| Height To Top Of Cab | 9.03ft in | 2750mm |
| Wheelbase | 7.06ft in | 2150mm |
| Reach At Max Lift And Dump | 2.3ft in | 700mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.