Specification sheet Wheel Loader Ref venieri-263b-wheel-loader
Venieri 263B
The Venieri 263B is a wheel loader with an operating weight of 8,818.49 lb (4,000 kg), a 51 hp engine, and a 0.79 yd³ (0.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,818.49lb
4,000kg
Engine power
51hp
38kW
Net Power Bucket capacity
0.79yd³
0.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Venieri 263B sits below the median for its class:
- Operating weight 8,820 lb lighter than 83% (n=374)
- Engine power 51 hp less powerful than 78% (n=367)
- Bucket capacity 0.8 yd³ smaller-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 404-22 | |
| Net Power | 51hp | 38kw |
| Displacement | 134.3cu in | 2.2L |
02 Operational Specification
| Operating Weight | 8818.5lb | 4000kg |
|---|---|---|
| Static Tipping Weight | 4519.5lb | 2050kg |
| Turning Radius | 6.3ft in | 1900mm |
| Tire Size | 12.0/75x18 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 7.88ft in | 2400mm |
|---|---|---|
| Bucket Width | 5.25ft in | 1600mm |
| Bucket Capacity - Heaped | 0.79yd3 | 0.6m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 15.26ft in | 4650mm |
| Width Over Tires | 5.09ft in | 1550mm |
| Height To Top Of Cab | 7.35ft in | 2240mm |
| Wheelbase | 6.73ft in | 2050mm |
| Reach At Max Lift And Dump | 2.63ft in | 800mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.