Specification sheet Compact Track Loader Ref toro-dingo-tx420-multi-terrain-loader

TORO DINGO TX420

The TORO DINGO TX420 is a compact track loader with a 20 hp engine, and a rated operating capacity of 500.45 lb (227 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
20hp
15kW
Gross Power
Rated operating capacity
500.45lb
227kg

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the TORO DINGO TX420 sits at the compact end of its class:

  • Engine power 20 hp less powerful than 100% (n=167)
  • Rated operating capacity 500 lb lower-rated than 98% (n=156)

Not positioned on operating weight — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

1171B117C2337A
Side elevation
1171B856D
Front elevation

01 Engine Specification

Engine Make Kohler
Gross Power 20hp 15kw

02 Weights Specification

Weight (Without Narrow Bucket) 1829.9lb 830kg

03 Loader Specification

Tip Capacity 1479.4lb 671kg
Operating Load 500.5lb 227kg

04 Hydraulic Specification

Hydraulic Reservoir 10.6gal 40L
Pump Flow 11.2gal/min 42.4L/min
Relief Valve Pressure 3000psi 20684.3kPa

05 Dimensions Dimensions

Ground Clearance 4.6in 116.84mm
Hinge Pin Height, Maximum Height 65.8in 1671.32mm
Overall Length 7.67ft in 2336.81mm
Overall Width 33.71in 855.98mm
Overall Height 3.85ft in 1170.95mm

06 Undercarriage Dimensions

Ground Speed - Rear 1.87mph 3km/h
Ground Speed - Front 4.35mph 7km/h

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.