Thomas 45
The Thomas 45 is a mini excavator with an operating weight of 9,832.7 lb, a 44.8 hp engine, and a dig depth of 13.41 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Thomas 45 sits at the heavy end of its class:
- Operating weight 9,830 lb heavier than 87% (n=438)
- Engine power 45 hp more powerful than 91% (n=448)
- Dig depth 13.4 ft deeper-digging than 97% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 18.69ft in | 5,697mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 19.53ft in | 5,953mm‖ — metric converted from the published imperial value |
| Max Loading Height | 13.77ft in | 4,197mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 10.93ft in | 3,331mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 13.41ft in | 4,087mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 6.07ft in | 1,850mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 6.27ft in | 1,911mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.01ft in | 2,441mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.86ft in | 1,481mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 15.75in | 400mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 4.2ft in | 1,280mm‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.86mph | 4.6km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2353 | |
|---|---|---|
| Engine Model | 4LE1PA-03 | |
| Gross Power | 44.8hp | 33.4kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2300rpm | |
| Displacement | 133cu in | 2,179cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 9832.7lb | 4,460kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 17gal | 64l‖ — metric converted from the published imperial value |
| Hydraulic System Relief Valve Pressure | 8745psi | 60,295kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 43.2gal/min | 164l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.