Specification sheet Skid Steer Loader Ref thomas-175-skid-steer-loader
Thomas 175
The Thomas 175 is a skid steer loader with an operating weight of 7,000 lb (3,175.15 kg), a 59.5 hp engine, a rated operating capacity of 1,750 lb (794 kg), and a 0.5 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,000lb
3,175.15kg
Engine power
59.5hp
44.4kW
Gross Power Rated operating capacity
1,750lb
794kg
Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Thomas 175 sits in the middle of its class:
- Operating weight 7,000 lb heavier than 57% (n=334)
- Engine power 60 hp less powerful than 56% (n=335)
- Rated operating capacity 1,750 lb lower-rated than 61% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V2203T Turbo | |
| Gross Power | 59.5hp | 44.4kw |
| Power Measured @ | 2800rpm | |
| Aspiration | Turbocharged | |
| Displacement | 122cu in | 2L |
02 Operational Specification
| Operational Weight | 7000lb | 3175.2kg |
|---|---|---|
| Hydraulic System Fluid Capacity | 14.8gal | 56.1L |
| Max Speed | 7.7mph | 12.4km/h |
| Operating Speed | 7.7mph | 12.4km/h |
| Operating Voltage | 12V |
03 Loader Specification
| Breakout Force | 4250lb | 1928kg |
|---|---|---|
| Operating Load Rating | 1750lb | 794kg |
| Bucket Capacity | 0.5yd3 | 0.4m3 |
04 Hydraulic Specification
| Pump Flow Capacity | 16.6gal/min | 62.9L/min |
|---|---|---|
| Relief Valve Pressure | 2400psi | 16547.5kPa |
05 Dimensions Dimensions
| Length With Bucket | 11.58ft in | 3529.59mm |
|---|---|---|
| Width Over Tires | 5.67ft in | 1728.22mm |
| Ground Clearance | 8.75in | 222.25mm |
| Height To Top Of Cab | 6.92ft in | 2109.22mm |
| Wheelbase | 3.29ft in | 1002.8mm |
| Length W/O Bucket | 9.18ft in | 2798.07mm |
| Clearance At Max Lift And Dump | 9.18ft in | 2798.07mm |
| Reach At Max Lift And Dump | 21.25in | 539.75mm |
| Turning Radius From Center - Machine Rear | 65.5in | 1663.7mm |
| Turning Radius From Center - Inc Bucket | 82.5in | 2095.5mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.