Specification sheet Skid Steer Loader Ref thomas-1700-skid-steer-loader
Thomas 1700
The Thomas 1700 is a skid steer loader with an operating weight of 6,600 lb (2,993.71 kg), a 50 hp engine, and a rated operating capacity of 1,700 lb (771.11 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,600lb
2,993.71kg
Engine power
50hp
37.3kW
Gross Power Rated operating capacity
1,700lb
771.11kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Thomas 1700 sits in the middle of its class:
- Operating weight 6,600 lb lighter than 54% (n=334)
- Engine power 50 hp less powerful than 72% (n=335)
- Rated operating capacity 1,700 lb lower-rated than 64% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V2203E | |
| Gross Power | 50hp | 37.3kw |
| Power Measured @ | 2800rpm | |
| Displacement | 134cu in | 2.2L |
02 Operational Specification
| Operational Weight | 6600lb | 2993.8kg |
|---|---|---|
| Fuel Capacity | 19.3gal | 73L |
| Max Speed | 7.1mph | 11.4km/h |
| Hydraulic System Fluid Capacity | 14.8gal | 56L |
| Tire Size | 10.00x16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps |
03 Loader Specification
| Breakout Force | 4000lb | 1814.4kg |
|---|---|---|
| Operating Load Rating | 1700lb | 771.2kg |
04 Hydraulic Specification
| Pump Flow Capacity | 16.6gal/min | 62.9L/min |
|---|---|---|
| Relief Valve Pressure | 5000psi | 34473.8kPa |
05 Dimensions Dimensions
| Length With Bucket | 11.61ft in | 3538mm |
|---|---|---|
| Width Over Tires | 5.36ft in | 1632mm |
| Ground Clearance | 7.33in | 186mm |
| Height To Top Of Cab | 6.92ft in | 2108mm |
| Wheelbase | 3.3ft in | 1003mm |
| Length W/O Bucket | 9.19ft in | 2800mm |
| Clearance At Max Lift And Dump | 9.23ft in | 2813mm |
| Reach At Max Lift And Dump | 21.26in | 540mm |
| Turning Radius From Center - Machine Rear | 32.76in | 832mm |
| Turning Radius From Center - Inc Bucket | 41.26in | 1048mm |
?Questions & answersfrom this machine's data
- How much does a Thomas 1700 skid steer weigh?
- A Thomas 1700 skid steer has an operating weight of 6,600 lb (2,993.7 kg).
- How much can a Thomas 1700 skid steer lift?
- A Thomas 1700 skid steer has a rated operating capacity of 1,700 lb (771.1 kg).
- What engine does a Thomas 1700 skid steer have?
- A Thomas 1700 skid steer is powered by a V2203E engine producing 50 hp (37.3 kW).
- What is the ground clearance of a Thomas 1700 skid steer?
- A Thomas 1700 skid steer has a ground clearance of 7.3 in (186 mm).
- How long is a Thomas 1700 skid steer?
- A Thomas 1700 skid steer has an overall length of 11.6 ft (3,538 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.