Thomas 15S
The Thomas 15S is a mini excavator with an operating weight of 3,307 lb, a 16.8 hp engine, and a dig depth of 7.78 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Thomas 15S sits at the compact end of its class:
- Operating weight 3,310 lb lighter than 90% (n=438)
- Engine power 17 hp less powerful than 78% (n=448)
- Dig depth 7.8 ft shallower-digging than 72% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 12.28ft in | 3,743mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 11.01ft in | 3,356mm‖ — metric converted from the published imperial value |
| Max Loading Height | 7.5ft in | 2,286mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.66ft in | 1,725mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.78ft in | 2,371mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 3.35ft in | 1,021mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 3.71ft in | 1,131mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.32ft in | 2,231mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.75ft in | 1,143mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 9.06in | 230mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 2.6ft in | 792mm‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.43mph | 3.91km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2251 | |
|---|---|---|
| Engine Model | L3E | |
| Gross Power | 16.8hp | 12.5kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2400rpm | |
| Displacement | 58.1cu in | 952cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 3307lb | 1,500kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 6.3gal | 24l‖ — metric converted from the published imperial value |
| Hydraulic System Relief Valve Pressure | 8106psi | 55,889kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 12.3gal/min | 46.6l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 11.5rpm |
|---|
?Questions & answersfrom this machine's data
- How much does a Thomas 15S mini excavator weigh?
- A Thomas 15S mini excavator has an operating weight of 3,307 lb (1,500 kg). The metric figure is converted from the published imperial value.
- What engine does a Thomas 15S mini excavator have?
- A Thomas 15S mini excavator is powered by a L3E engine producing 16.8 hp (12.5 kW). The metric figure is converted from the published imperial value.
- How deep can a Thomas 15S mini excavator dig?
- A Thomas 15S mini excavator has a maximum dig depth of 7.8 ft (2,371 mm). The metric figure is converted from the published imperial value.
- What is the tail swing radius of a Thomas 15S mini excavator?
- A Thomas 15S mini excavator has a tail swing radius of 3.8 ft (1,143 mm). The metric figure is converted from the published imperial value.
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.