Specification sheet Skid Steer Loader Ref thomas-1300-skid-steer-loader
Thomas 1300
The Thomas 1300 is a skid steer loader with an operating weight of 4,800 lb (2,177.25 kg), a 43 hp engine, and a rated operating capacity of 1,300 lb (589.68 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
4,800lb
2,177.25kg
Engine power
43hp
32kW
Gross Power Rated operating capacity
1,300lb
589.68kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Thomas 1300 sits at the compact end of its class:
- Operating weight 4,800 lb lighter than 87% (n=334)
- Engine power 43 hp less powerful than 86% (n=335)
- Rated operating capacity 1,300 lb lower-rated than 88% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | V1903E | |
| Gross Power | 43hp | 32kw |
| Displacement | 113.3cu in | 1.9L |
02 Operational Specification
| Operational Weight | 4800lb | 2177.3kg |
|---|---|---|
| Hydraulic System Fluid Capacity | 8.1gal | 30.3L |
| Operating Speed | 6.3mph | 10km/h |
03 Loader Specification
| Breakout Force | 3260lb | 1478.8kg |
|---|---|---|
| Operating Load Rating | 1300lb | 589.7kg |
04 Hydraulic Specification
| Pump Flow Capacity | 14.5gal/min | 54.9L/min |
|---|---|---|
| Relief Valve Pressure | 2400psi | 16547.5kPa |
05 Dimensions Dimensions
| Length With Bucket | 10.55ft in | 3213mm |
|---|---|---|
| Width Over Tires | 4.42ft in | 1346mm |
| Ground Clearance | 6.5in | 165mm |
| Height To Top Of Cab | 6.15ft in | 1873mm |
| Wheelbase | 2.92ft in | 889mm |
| Length W/O Bucket | 8.57ft in | 2610mm |
| Clearance At Max Lift And Dump | 7.46ft in | 2271mm |
| Reach At Max Lift And Dump | 22.01in | 559mm |
| Turning Radius From Center - Machine Rear | 30.5in | 774.5mm |
| Turning Radius From Center - Inc Bucket | 35in | 889mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.