Specification sheet Wheel Loader Ref terex-txl500-2-wheel-loader
Terex TXL500-2
The Terex TXL500-2 is a wheel loader with an operating weight of 67,681 lb (30,699.59 kg), a 335 hp engine, and a 6.28 yd³ (4.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
67,681lb
30,699.59kg
Engine power
335hp
249.81kW
Gross Power Bucket capacity
6.28yd³
4.8m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Terex TXL500-2 sits at the heavy end of its class:
- Operating weight 67,680 lb heavier than 89% (n=198)
- Engine power 335 hp more powerful than 86% (n=190)
- Bucket capacity 6.3 yd³ larger-bucket than 73% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSM11 | |
| Gross Power | 335hp | 249.9kw |
| Power Measured @ | 1900rpm | |
| Max Torque | 1237lb ft | 1677.2Nm |
| Displacement | 659cu in | 10.8L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 67681lb | 30699.6kg |
|---|---|---|
| Fuel Capacity | 125.8gal | 476L |
| Hydraulic System Fluid Capacity | 62.4gal | 236L |
| Engine Oil Fluid Capacity | 9gal | 34L |
| Cooling System Fluid Capacity | 15.9gal | 60L |
| Transmission Fluid Capacity | 14.3gal | 54L |
| Front Axle/Diff Fluid Capacity | 13.3gal | 50L |
| Rear Axle/Diff Fluid Capacity | 13.3gal | 50L |
| Static Tipping Weight | 50706.4lb | 23000kg |
| Turning Radius | 24.2ft in | 7370mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 29.5-25-22PR (L3) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.8mph | 35km/h |
| Max Speed - Reverse | 15.2mph | 24.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3626psi | 25000.4kPa |
|---|---|---|
| Pump Flow Capacity | 122.5gal/min | 463.8L/min |
| Raise Time | 6sec | |
| Dump Time | 1.8sec | |
| Lower Time | 4.3sec | |
| Pump Type | two load-sensing axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.24ft in | 3120mm |
|---|---|---|
| Bucket Capacity - Heaped | 6.28yd3 | 4.8m3 |
| Bucket Width | 11.16ft in | 3400mm |
| Breakout Force | 61373lb | 273kN |
06 Dimensions Dimensions
| Ground Clearance | 1.68ft in | 510mm |
|---|---|---|
| Length With Bucket On Ground | 31.25ft in | 9525mm |
| Height To Top Of Cab | 12.54ft in | 3820mm |
| Wheelbase | 11.82ft in | 3600mm |
| Hinge Pin - Max Height | 15.04ft in | 4584mm |
| Reach At Max Lift And Dump | 4.7ft in | 1430mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.