Specification sheet Wheel Loader Ref terex-txl300-1-wheel-loader
Terex TXL300-1
The Terex TXL300-1 is a wheel loader with an operating weight of 38,139.97 lb (17,300 kg), a 209 hp engine, and a 3.67 yd³ (2.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
38,139.97lb
17,300kg
Engine power
209hp
155.86kW
Gross Power Bucket capacity
3.67yd³
2.8m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Terex TXL300-1 sits above the median for its class:
- Operating weight 38,140 lb heavier than 77% (n=439)
- Engine power 209 hp more powerful than 84% (n=408)
- Bucket capacity 3.7 yd³ larger-bucket than 66% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2253 | |
|---|---|---|
| Engine Model | DE08TIS | |
| Gross Power | 209hp | 155.9kw |
| Power Measured @ | 2100rpm | |
| Displacement | 492.5cu in | 8.1L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 38140lb | 17300kg |
|---|---|---|
| Fuel Capacity | 85.1gal | 322L |
| Hydraulic System Fluid Capacity | 55.5gal | 210L |
| Engine Oil Fluid Capacity | 5.6gal | 21L |
| Cooling System Fluid Capacity | 13.3gal | 50L |
| Transmission Fluid Capacity | 12.7gal | 48L |
| Front Axle/Diff Fluid Capacity | 11.9gal | 45L |
| Rear Axle/Diff Fluid Capacity | 10.6gal | 40L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees |
03 Transmission Specification
| Transmission Type | full auto powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.7mph | 36.5km/h |
| Max Speed - Reverse | 15.1mph | 24.3km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2845psi | 19615.6kPa |
|---|---|---|
| Pump Flow Capacity | 73gal/min | 276.4L/min |
| Raise Time | 6sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.6sec | |
| Pump Type | sealed system with anticavitation and relief valves |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.51ft in | 2898mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.67yd3 | 2.8m3 |
| Bucket Width | 8.96ft in | 2730mm |
| Breakout Force | 40785lb | 181.43kN |
06 Dimensions Dimensions
| Ground Clearance | 1.55ft in | 470mm |
|---|---|---|
| Length With Bucket On Ground | 26.02ft in | 7930mm |
| Height To Top Of Cab | 11.39ft in | 3470mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.13ft in | 4000mm |
| Reach At Max Lift And Dump | 3.8ft in | 1157mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.