Specification sheet Skid Steer Loader Ref terex-tsv60-skid-steer-loader
Terex TSV60
The Terex TSV60 is a skid steer loader with an operating weight of 6,986 lb (3,168.8 kg), a 60 hp engine, and a rated operating capacity of 2,000 lb (907.19 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,986lb
3,168.8kg
Engine power
60hp
44.8kW
Gross Power Rated operating capacity
2,000lb
907.19kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Terex TSV60 sits in the middle of its class:
- Operating weight 6,990 lb heavier than 56% (n=334)
- Engine power 60 hp less powerful than 56% (n=335)
- Rated operating capacity 2,000 lb higher-rated than 56% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Tier 4 | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Model | Perkins 404D-22T | |
| Gross Power | 60hp | 44.8kw |
| Power Measured @ | 2800rpm | |
| Max Torque | 140lb ft | 189.9Nm |
| Displacement | 134.3cu in | 2.2L |
02 Operational Specification
| Operational Weight | 6986lb | 3168.8kg |
|---|---|---|
| Shipping Weight - Empty | 6261lb | 2840kg |
| Fuel Capacity | 25gal | 94.6L |
| Engine Oil Fluid Capacity | 2.9gal | 10.6L |
| Max Speed | 12mph | 19.4km/h |
| Hydraulic System Fluid Capacity | 8gal | 30.2L |
| Tire Size | 10X16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Loader Specification
| Tipping Load (Iso 14397) | 4000lb | 1814.4kg |
|---|---|---|
| Operating Load Rating | 2000lb | 907.2kg |
04 Hydraulic Specification
| Pump Flow Capacity | 17.2gal/min | 65L/min |
|---|
05 Dimensions Dimensions
| Length With Bucket | 11.37ft in | 3464mm |
|---|---|---|
| Width Over Tires | 5.55ft in | 1689mm |
| Wheelbase | 3.39ft in | 1031mm |
| Dump Ground Clearance | 0.84ft in | 254mm |
| Height To Top Of Rops | 77in | 1955.8mm |
| Ground Clearance - Unloaded | 10.5in | 266.7mm |
| Height To Hinge Pin | 118in | 2997.2mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.