Specification sheet Skid Steer Loader Ref terex-tsr80-skid-steer-loader
Terex TSR80
The Terex TSR80 is a skid steer loader with an operating weight of 7,749.25 lb (3,515 kg), and a 83 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,749.25lb
3,515kg
Engine power
83hp
61.9kW
Gross Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Terex TSR80 sits above the median for its class:
- Operating weight 7,750 lb heavier than 74% (n=334)
- Engine power 83 hp more powerful than 85% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Tier 4 | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Make | Perkins 804D-33T | |
| Gross Power | 83hp | 61.9kw |
| Air Cleaner | Dual Stage | |
| Max Torque | 195.5lb ft | 265Nm |
| Displacement | 201.4cu in | 3.3L |
02 Operational Specification
| Operational Weight | 7749.3lb | 3515kg |
|---|---|---|
| Fuel Capacity | 29.9gal | 113L |
| Shipping Weight - Empty | 6900.5lb | 3130kg |
| Engine Oil Fluid Capacity | 2.3gal | 8.6L |
| Hydraulic System Fluid Capacity | 10.1gal | 38L |
| Tire Size | 12x16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Loader Specification
| Operating Capacity (Iso 14397) | 2319.3lb | 1052kg |
|---|---|---|
| Tipping Load (Iso 14397) | 4640.8lb | 2105kg |
| Bucket Breakout Force (Iso 14397) | 5498.4lb | 2494kg |
04 Hydraulic Specification
| Auxiliary Hydraulic Flow | 21.4gal/min | 81L/min |
|---|---|---|
| Relief Valve Pressure | 3300psi | 22752.7kPa |
05 Dimensions Dimensions
| Length With Bucket | 12.01ft in | 3658mm |
|---|---|---|
| Width Over Tires | 6.01ft in | 1829mm |
| Ground Clearance | 10.52in | 267mm |
| Wheelbase | 4.09ft in | 1245mm |
| Height To Hinge Pin | 125in | 3175mm |
| Height To Top Of Rops | 3.26in | 82.75mm |
| Rear Departure Angle | 26 | |
| Dump Angle | 46degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.