Specification sheet Skid Steer Loader Ref terex-tsr70-skid-steer-loader
Terex TSR70
The Terex TSR70 is a skid steer loader with an operating weight of 7,449.42 lb (3,379 kg), and a 74 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,449.42lb
3,379kg
Engine power
74hp
55.2kW
Gross Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Terex TSR70 sits above the median for its class:
- Operating weight 7,450 lb heavier than 67% (n=334)
- Engine power 74 hp more powerful than 69% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Tier 3 | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Cooling Method | Engine-Driven Fan And Coolant/Anti-Freeze Filled Radiator | |
| Engine Model | Perkins 804D-33T | |
| Gross Power | 74hp | 55.2kw |
| Air Cleaner | Dual Stage | |
| Power Measured @ | 2500rpm | |
| Max Torque | 180.8lb ft | 245Nm |
| Displacement | 201.4cu in | 3.3L |
02 Operational Specification
| Operational Weight | 7449.5lb | 3379kg |
|---|---|---|
| Fuel Capacity | 8gal | 30L |
| Shipping Weight - Empty | 6598.5lb | 2993kg |
| Engine Oil Fluid Capacity | 2.3gal | 8.6L |
| Hydraulic System Fluid Capacity | 2.7gal | 10L |
| Tire Size | 12x16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Loader Specification
| Operating Capacity (Iso 14397) | 1999.6lb | 907kg |
|---|---|---|
| Tipping Load (Iso 14397) | 3986lb | 1808kg |
04 Hydraulic Specification
| Pump Flow Capacity | 21.4gal/min | 81L/min |
|---|---|---|
| Relief Valve Pressure | 3335psi | 22994kPa |
05 Axles Specification
| Tractive Effort | 28541.5lb ft | 38697.1Nm |
|---|
06 Dimensions Dimensions
| Length With Bucket | 12ft in | 3657mm |
|---|---|---|
| Width Over Tires | 6ft in | 1828mm |
| Ground Clearance | 10.52in | 267mm |
| Wheelbase | 4.09ft in | 1244mm |
| Length W/O Bucket | 8.96ft in | 2728.3mm |
| Dump Angle | 46degrees | |
| Rear Departure Angle | 26 | |
| Height To Top Of Rops | 82.75in | 2101.81mm |
| Height To Hinge Pin | 125in | 3175mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.