Specification sheet Skid Steer Loader Ref terex-tsr60-skid-steer-loader
Terex TSR60
The Terex TSR60 is a skid steer loader with an operating weight of 6,479.39 lb (2,939 kg), and a 60 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,479.39lb
2,939kg
Engine power
60hp
44.8kW
Gross Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Terex TSR60 sits in the middle of its class:
- Operating weight 6,480 lb lighter than 59% (n=334)
- Engine power 60 hp less powerful than 56% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Tier 4 | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Cooling Method | Engine-Driven Fan and Coolant/Anti-Freeze Filled Radiator | |
| Engine Model | Perkins 404D-22T | |
| Gross Power | 60hp | 44.8kw |
| Air Cleaner | Dual Stage | |
| Power Measured @ | 2800rpm | |
| Max Torque | 140.2lb ft | 190Nm |
| Displacement | 134.3cu in | 2.2L |
02 Operational Specification
| Operational Weight | 6479.4lb | 2939kg |
|---|---|---|
| Fuel Capacity | 25.1gal | 95L |
| Shipping Weight - Empty | 5754.1lb | 2610kg |
| Engine Oil Fluid Capacity | 2.9gal | 10.6L |
| Max Speed | 7.4mph | 12km/h |
| Hydraulic System Fluid Capacity | 8gal | 30L |
| Tire Size | 10x16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Loader Specification
| Dump Angle @ Max. Height | 40degrees |
|---|
04 Hydraulic Specification
| Pump Flow Capacity | 17.2gal/min | 65L/min |
|---|---|---|
| Relief Valve Pressure | 335psi | 2309.8kPa |
05 Axles Specification
| Tractive Effort | 27673.6lb ft | 37520.3Nm |
|---|
06 Dimensions Dimensions
| Length With Bucket | 11.34ft in | 3454mm |
|---|---|---|
| Width Over Tires | 5.5ft in | 1676mm |
| Wheelbase | 3.39ft in | 1031mm |
| Length W/O Bucket | 8.55ft in | 2603.5mm |
| Dump Ground Clearance | 0.84ft in | 254mm |
| Height To Top Of Rops | 77in | 1955.8mm |
| Height To Hinge Pin | 115in | 2921mm |
| Ground Clearance - Unloaded | 10.5in | 266.7mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.